# Anycubic Kobra 2 Pro: specs, SimplyPrint compatibility and setup > **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints. - By Anycubic, China - Canonical page: https://staging.simplyprint.io/compatibility/anycubic-kobra-2-pro ## Anycubic Kobra 2 Pro at a glance The Anycubic Kobra 2 Pro is a 3D printer by Anycubic with a 220 x 220 x 250 mm build volume. - Build volume: 220 x 220 x 250 mm - Prints well: PLA, PETG, TPU & flexibles ## Connect the Anycubic Kobra 2 Pro to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint Client | Compatible | A computer or Raspberry Pi on the same network that stays on, running the SimplyPrint Client | | | Klipper (Moonraker) | With community firmware | The community firmware Rinkhals, installed in place of the printer's own | [Needs the community firmware Rinkhals](https://jbatonnet.github.io/Rinkhals/guides/simplyprint-support/) | | OctoPrint (Directly, over USB) | Not compatible | | | - [How to set up SimplyPrint on Anycubic Kobra 2 Pro](https://staging.simplyprint.io/setup-guide/anycubic/kobra-2-pro.md) - [How to set up Mainsail on Anycubic Kobra 2 Pro](https://docs.mainsail.xyz/setup) - [How to set up Fluidd on Anycubic Kobra 2 Pro](https://docs.fluidd.xyz/installation) ### What works with SimplyPrint Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Anycubic Kobra 2 Pro: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts. Not available through Klipper (Moonraker): print sliced 3MF files, map filament to multi-material slots and sync loaded filament from the multi-material unit. ## What slicer to use for the Anycubic Kobra 2 Pro Use OrcaSlicer or ElegooSlicer: each has a ready-made profile for the Anycubic Kobra 2 Pro. - [OrcaSlicer](https://staging.simplyprint.io/features/slicer/orcaslicer): Ready-made profile for the Anycubic Kobra 2 Pro · Runs in the SimplyPrint cloud - [ElegooSlicer](https://staging.simplyprint.io/features/slicer/elegooslicer): Ready-made profile for the Anycubic Kobra 2 Pro · Runs in the SimplyPrint cloud - [PrusaSlicer](https://staging.simplyprint.io/features/slicer/prusaslicer): No profile for the Anycubic Kobra 2 Pro · Runs in the SimplyPrint cloud - [BambuStudio](https://staging.simplyprint.io/features/slicer/bambustudio): No profile for the Anycubic Kobra 2 Pro · Runs in the SimplyPrint cloud - [CrealityPrint](https://staging.simplyprint.io/features/slicer/crealityprint): No profile for the Anycubic Kobra 2 Pro · Runs in the SimplyPrint cloud - [Cura](https://staging.simplyprint.io/features/slicer/cura): No profile for the Anycubic Kobra 2 Pro · Runs in the SimplyPrint cloud - [Kiri:Moto](https://staging.simplyprint.io/features/slicer/kirimoto): No profile for the Anycubic Kobra 2 Pro · Runs in the SimplyPrint cloud - [Anycubic Slicer Next](https://github.com/ANYCUBIC-3D/AnycubicSlicerNext/releases): Made by Anycubic, not in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Anycubic Kobra 2 Pro. ## The app for the Anycubic Kobra 2 Pro SimplyPrint works as the Anycubic Kobra 2 Pro's app: on your phone and in any browser, with a slicer in the cloud. - An app for iPhone and Android, the same in any browser, and a slicer in the cloud. - More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team. - Printers from many brands in one place, side by side. - Hosted in Frankfurt, Germany, under the GDPR. [Connect the Anycubic Kobra 2 Pro to SimplyPrint, free](https://staging.simplyprint.io/setup-guide/anycubic/kobra-2-pro) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev) [SimplyPrint's print farm software for Anycubic](https://staging.simplyprint.io/print-farms/anycubic) ## Automate the Anycubic Kobra 2 Pro ### Ways to automate it - [Your own ejection G-code](https://staging.simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print. - [A robot arm, or anything with an API](https://staging.simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system. - [Clear it by hand, keep the queue](https://staging.simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job. [How AutoPrint works](https://staging.simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up. ## Anycubic Kobra 2 Pro specifications: bed size, print height and more ### Size - Build volume: 220 x 220 x 250 mm - Bed type: Square - Bed size: 220 x 220 mm - Max print height: 250 mm ### Printing - Max extruder temperature: 260 °C - Has heated bed: Yes - Max bed temperature: 110 °C - Number of nozzles: 1 - Direct drive: Yes - Probing tool / Auto Bed Leveling: Yes - Filament width: 1.75 mm ### Connecting - Supports serial printing: No - Shipped firmware: Klipper ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) - Has start options: Yes (Available options: Bed Leveling, Vibration Compensation, Flow Calibration) ### The printer - Printer manufacturer / brand: Anycubic - Printer model name: Kobra 2 Pro - Made by a company from: China ## What filament can the Anycubic Kobra 2 Pro print? Filament compatibility for the Anycubic Kobra 2 Pro: the materials it can handle, judged from its hotend, bed, chamber and enclosure. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. | | PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). | | TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. | | ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. | | Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. | | Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. | | Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. | ### Best filament for the Anycubic Kobra 2 Pro Filaments the Anycubic Kobra 2 Pro prints well, Anycubic's own first, then the best known. - [Anycubic PETG](https://staging.simplyprint.io/filaments/anycubic/petg): PETG, 190-270 °C - [Anycubic PLA Basic](https://staging.simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C - [Anycubic PLA Matte](https://staging.simplyprint.io/filaments/anycubic/pla-matte): PLA, 190-240 °C - [Anycubic PLA Silk](https://staging.simplyprint.io/filaments/anycubic/pla-silk): PLA, 190-240 °C - [Bambu Lab PLA Basic](https://staging.simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-240 °C - [Bambu Lab PLA Matte](https://staging.simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C - [SUNLU PLA](https://staging.simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C - [Bambu Lab PETG Basic](https://staging.simplyprint.io/filaments/bambu-lab/petg-basic): PETG, 230-270 °C ## Compare the Anycubic Kobra 2 Pro with similar printers - [Anycubic Kobra 2 Neo](https://staging.simplyprint.io/compatibility/anycubic-kobra-2-neo): Compatible, 220 x 220 x 250 mm, Also by Anycubic · Similar build volume - [Anycubic Kobra S1](https://staging.simplyprint.io/compatibility/anycubic-kobra-s1): Compatible, 250 x 250 x 250 mm, Also by Anycubic · Similar build volume - [Bambu Lab P1S](https://staging.simplyprint.io/compatibility/bambu-lab-p1s): Compatible, 256 x 256 x 256 mm, Similar build volume - [Creality Ender-3](https://staging.simplyprint.io/compatibility/creality-ender-3): Compatible, 220 x 220 x 250 mm, Similar build volume - [Compare the Anycubic Kobra 2 Pro with other printers](https://staging.simplyprint.io/compatibility/compare?compare=anycubic-kobra-2-pro#choose) Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. ## Frequently asked questions ### Is the Anycubic Kobra 2 Pro compatible with SimplyPrint? Yes. You can connect the Anycubic Kobra 2 Pro to SimplyPrint via SimplyPrint Client or Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app. ### How do I connect the Anycubic Kobra 2 Pro to SimplyPrint? Follow our step-by-step setup guide for the Anycubic Kobra 2 Pro. It shows how to connect it via SimplyPrint Client or Klipper (Moonraker), what you need for each, and which to pick. ### What slicer should I use for the Anycubic Kobra 2 Pro? We recommend OrcaSlicer for the Anycubic Kobra 2 Pro. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Anycubic Kobra 2 Pro kept up to date automatically. ### Can I use OrcaSlicer with the Anycubic Kobra 2 Pro? Yes. OrcaSlicer comes with a profile for the Anycubic Kobra 2 Pro, and you can run it in SimplyPrint's online slicer, so there's nothing to install. ### What filament can the Anycubic Kobra 2 Pro print? Based on its specs (hotend up to 260C, heated bed up to 110C), the Anycubic Kobra 2 Pro handles PLA, PETG, or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites. ### Does the Anycubic Kobra 2 Pro work with OctoPrint or Klipper? The Anycubic Kobra 2 Pro works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top. ### What is the Anycubic Kobra 2 Pro's bed size and build volume? The Anycubic Kobra 2 Pro has a 220 x 220 mm print bed and prints up to 250 mm tall, a build volume of about 220 x 220 x 250 mm. See the full specifications table above for bed type, temperatures and more. ### Can the Anycubic Kobra 2 Pro eject prints automatically? There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.