# Bambu Lab P1P + AMS: specs, SimplyPrint compatibility and setup

> **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

- By Bambu Lab, China
- Canonical page: https://staging.simplyprint.io/compatibility/bambu-lab-p1p-plus-ams

## Bambu Lab P1P + AMS at a glance

The Bambu Lab P1P + AMS is a 3D printer by Bambu Lab with a 256 x 256 x 256 mm build volume.

- Build volume: 256 x 256 x 256 mm
- Prints well: PLA, PETG, TPU & flexibles

## Connect the Bambu Lab P1P + AMS to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint Client | Compatible | A computer or Raspberry Pi on the same network that stays on, running the SimplyPrint Client |  |
| Klipper (Moonraker) | Not compatible |  |  |
| OctoPrint (Directly, over USB) | Not compatible |  |  |

- [How to set up SimplyPrint on Bambu Lab P1P + AMS](https://staging.simplyprint.io/setup-guide/bambu-lab/p1p.md)

### What works with SimplyPrint

Connected through SimplyPrint Client in LAN-only mode, SimplyPrint supports everything the Bambu Lab P1P + AMS lets other software do: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control, filament mapping for its multi-material unit and AutoPrint. The only exceptions are what the Bambu Lab P1P + AMS doesn't let other software do: baby stepping, bed leveling and Z-Offset Calibration.

## What slicer to use for the Bambu Lab P1P + AMS

Use BambuStudio, Bambu Lab's own slicer: it has a ready-made profile for the Bambu Lab P1P + AMS. Also with a profile for it: OrcaSlicer, ElegooSlicer, CrealityPrint.

- [BambuStudio](https://staging.simplyprint.io/features/slicer/bambustudio): Ready-made profile for the Bambu Lab P1P + AMS · Bambu Lab's own slicer · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://staging.simplyprint.io/features/slicer/orcaslicer): Ready-made profile for the Bambu Lab P1P + AMS · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://staging.simplyprint.io/features/slicer/elegooslicer): Ready-made profile for the Bambu Lab P1P + AMS · Runs in the SimplyPrint cloud
- [CrealityPrint](https://staging.simplyprint.io/features/slicer/crealityprint): Ready-made profile for the Bambu Lab P1P + AMS · Runs in the SimplyPrint cloud
- [PrusaSlicer](https://staging.simplyprint.io/features/slicer/prusaslicer): No profile for the Bambu Lab P1P + AMS · Runs in the SimplyPrint cloud
- [Cura](https://staging.simplyprint.io/features/slicer/cura): No profile for the Bambu Lab P1P + AMS · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://staging.simplyprint.io/features/slicer/kirimoto): No profile for the Bambu Lab P1P + AMS · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Bambu Lab P1P + AMS.

## The app for the Bambu Lab P1P + AMS

SimplyPrint works as the Bambu Lab P1P + AMS's app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the Bambu Lab P1P + AMS to SimplyPrint, free](https://staging.simplyprint.io/setup-guide/bambu-lab/p1p) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

[SimplyPrint's print farm software for Bambu Lab](https://staging.simplyprint.io/print-farms/bambu-lab)

## Automate the Bambu Lab P1P + AMS

### Ways to automate it

- [Your own ejection G-code](https://staging.simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://staging.simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://staging.simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://staging.simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## Bambu Lab P1P + AMS specifications: bed size, print height and more

### Size

- Build volume: 256 x 256 x 256 mm
- Bed type: Square
- Bed size: 256 x 256 mm
- Max print height: 256 mm

### Printing

- Max extruder temperature: 280 °C
- Has heated bed: Yes
- Max bed temperature: 100 °C
- Number of nozzles: 1
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Connecting

- Supports serial printing: No
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g), Zip-format files (e.g., 3MF)
- Slicer profile name(s): `Bambu Lab P1P`, `Bambu Lab P1P Combo`
- Slicer program download: [Download slicer program](https://bambulab.com/download). [Or try our web-based slicer for the Bambu Lab P1P + AMS](https://staging.simplyprint.io/features/slicer/bambustudio)
- Has start options: Yes (Available options: Use AMS, Bed Leveling, Timelapse)

### The printer

- Printer manufacturer / brand: Bambu Lab
- Printer model name: P1P + AMS
- Made by a company from: China

## What filament can the Bambu Lab P1P + AMS print?

Filament compatibility for the Bambu Lab P1P + AMS: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the Bambu Lab P1P + AMS

Filaments the Bambu Lab P1P + AMS prints well, Bambu Lab's own first, then the best known.

- [Bambu Lab PLA Basic](https://staging.simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-240 °C
- [Bambu Lab PLA Matte](https://staging.simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [Bambu Lab PETG Basic](https://staging.simplyprint.io/filaments/bambu-lab/petg-basic): PETG, 230-270 °C
- [Bambu Lab PETG HF](https://staging.simplyprint.io/filaments/bambu-lab/petg-hf): PETG, 230-270 °C
- [SUNLU PLA](https://staging.simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C
- [Anycubic PETG](https://staging.simplyprint.io/filaments/anycubic/petg): PETG, 190-270 °C
- [Anycubic PLA Basic](https://staging.simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Creality Hyper PLA](https://staging.simplyprint.io/filaments/creality/hyper-pla): PLA, 1-2 °C

## Compare the Bambu Lab P1P + AMS with similar printers

- [Bambu Lab P1S](https://staging.simplyprint.io/compatibility/bambu-lab-p1s): Compatible, 256 x 256 x 256 mm, Also by Bambu Lab · Similar build volume
- [Bambu Lab A1](https://staging.simplyprint.io/compatibility/bambu-lab-a1): Compatible, 256 x 256 x 256 mm, Also by Bambu Lab · Similar build volume
- [Creality Ender-3](https://staging.simplyprint.io/compatibility/creality-ender-3): Compatible, 220 x 220 x 250 mm, Similar build volume
- [Creality Ender-3 v2](https://staging.simplyprint.io/compatibility/creality-ender-3-v2): Compatible, 220 x 220 x 250 mm, Similar build volume
- [Compare the Bambu Lab P1P + AMS with other printers](https://staging.simplyprint.io/compatibility/compare?compare=bambu-lab-p1p-plus-ams#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the Bambu Lab P1P + AMS compatible with SimplyPrint?

Yes. You can connect the Bambu Lab P1P + AMS to SimplyPrint via SimplyPrint Client, then slice, queue, start and monitor prints from your browser or the mobile app.

### How do I connect the Bambu Lab P1P + AMS to SimplyPrint?

Follow our step-by-step setup guide for the Bambu Lab P1P + AMS. It shows how to connect it via SimplyPrint Client, what you need for each, and which to pick.

### What slicer should I use for the Bambu Lab P1P + AMS?

We recommend BambuStudio for the Bambu Lab P1P + AMS. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Bambu Lab P1P + AMS kept up to date automatically.

### Can I use OrcaSlicer with the Bambu Lab P1P + AMS?

Yes. OrcaSlicer comes with a profile for the Bambu Lab P1P + AMS, and you can run it in SimplyPrint's online slicer, so there's nothing to install.

### What filament can the Bambu Lab P1P + AMS print?

Based on its specs (hotend up to 280C, heated bed up to 100C), the Bambu Lab P1P + AMS handles PLA, PETG, or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.

### Does the Bambu Lab P1P + AMS work with OctoPrint or Klipper?

Not that we know of, but you don't need either: SimplyPrint connects to the Bambu Lab P1P + AMS via SimplyPrint Client.

### What is the Bambu Lab P1P + AMS's bed size and build volume?

The Bambu Lab P1P + AMS has a 256 x 256 mm print bed and prints up to 256 mm tall, a build volume of about 256 x 256 x 256 mm. See the full specifications table above for bed type, temperatures and more.

### Can the Bambu Lab P1P + AMS eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.