# Creality Ender-3 V3 Plus: specs, SimplyPrint compatibility and setup

> **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

- By Creality, China
- Canonical page: https://staging.simplyprint.io/compatibility/creality-ender-3-v3-plus

## Creality Ender-3 V3 Plus at a glance

The Creality Ender-3 V3 Plus is a 3D printer by Creality with a 300 x 300 x 330 mm build volume.

- Build volume: 300 x 300 x 330 mm
- Prints well: PLA, PETG, TPU & flexibles

## Connect the Creality Ender-3 V3 Plus to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint Client | Compatible | A computer or Raspberry Pi on the same network that stays on, running the SimplyPrint Client |  |
| Klipper (Moonraker) | Compatible | Nothing extra: the printer runs Klipper as it ships |  |
| OctoPrint (Directly, over USB) | Not compatible |  |  |

- [How to set up SimplyPrint on Creality Ender-3 V3 Plus](https://staging.simplyprint.io/setup-guide/creality/ender-3-v3-plus.md)
- [How to set up Mainsail on Creality Ender-3 V3 Plus](https://docs.mainsail.xyz/setup)
- [How to set up Fluidd on Creality Ender-3 V3 Plus](https://docs.fluidd.xyz/installation)

### What works with SimplyPrint

Connected through SimplyPrint Client, SimplyPrint supports most of what it offers on the Creality Ender-3 V3 Plus: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control, filament mapping for its multi-material unit and AutoPrint. Not available through SimplyPrint Client: baby stepping and Z-Offset Calibration.

## What slicer to use for the Creality Ender-3 V3 Plus

Use CrealityPrint, Creality's own slicer: it has a ready-made profile for the Creality Ender-3 V3 Plus. Also with a profile for it: OrcaSlicer, BambuStudio, ElegooSlicer.

- [CrealityPrint](https://staging.simplyprint.io/features/slicer/crealityprint): Ready-made profile for the Creality Ender-3 V3 Plus · Creality's own slicer · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://staging.simplyprint.io/features/slicer/orcaslicer): Ready-made profile for the Creality Ender-3 V3 Plus · Runs in the SimplyPrint cloud
- [BambuStudio](https://staging.simplyprint.io/features/slicer/bambustudio): Ready-made profile for the Creality Ender-3 V3 Plus · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://staging.simplyprint.io/features/slicer/elegooslicer): Ready-made profile for the Creality Ender-3 V3 Plus · Runs in the SimplyPrint cloud
- [PrusaSlicer](https://staging.simplyprint.io/features/slicer/prusaslicer): No profile for the Creality Ender-3 V3 Plus · Runs in the SimplyPrint cloud
- [Cura](https://staging.simplyprint.io/features/slicer/cura): No profile for the Creality Ender-3 V3 Plus · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://staging.simplyprint.io/features/slicer/kirimoto): No profile for the Creality Ender-3 V3 Plus · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Creality Ender-3 V3 Plus.

## The app for the Creality Ender-3 V3 Plus

SimplyPrint works as the Creality Ender-3 V3 Plus's app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the Creality Ender-3 V3 Plus to SimplyPrint, free](https://staging.simplyprint.io/setup-guide/creality/ender-3-v3-plus) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

[SimplyPrint's print farm software for Creality](https://staging.simplyprint.io/print-farms/creality)

## Automate the Creality Ender-3 V3 Plus

### Ways to automate it

- [Your own ejection G-code](https://staging.simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://staging.simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://staging.simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://staging.simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## Creality Ender-3 V3 Plus specifications: bed size, print height and more

### Size

- Build volume: 300 x 300 x 330 mm
- Bed type: Square
- Bed size: 300 x 300 mm
- Max print height: 330 mm

### Printing

- Max extruder temperature: 300 °C
- Has heated bed: Yes
- Max bed temperature: 100 °C
- Number of nozzles: 1
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Connecting

- Supports serial printing: No
- Shipped firmware: Klipper

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Creality
- Printer model name: Ender-3 V3 Plus
- Made by a company from: China

## What filament can the Creality Ender-3 V3 Plus print?

Filament compatibility for the Creality Ender-3 V3 Plus: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the Creality Ender-3 V3 Plus

Filaments the Creality Ender-3 V3 Plus prints well, Creality's own first, then the best known.

- [Creality Hyper PLA](https://staging.simplyprint.io/filaments/creality/hyper-pla): PLA, 1-2 °C
- [Creality PETG](https://staging.simplyprint.io/filaments/creality/petg): PETG, 220-250 °C
- [Creality PLA](https://staging.simplyprint.io/filaments/creality/pla): PLA, 190-230 °C
- [Creality 95A TPU](https://staging.simplyprint.io/filaments/creality/95a-tpu): TPU, 210-240 °C
- [Bambu Lab PLA Basic](https://staging.simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-240 °C
- [Bambu Lab PLA Matte](https://staging.simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://staging.simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C
- [Anycubic PETG](https://staging.simplyprint.io/filaments/anycubic/petg): PETG, 190-270 °C

## Compare the Creality Ender-3 V3 Plus with similar printers

- [Creality K1 Max](https://staging.simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Also by Creality · Similar build volume
- [Creality K2 Plus Combo](https://staging.simplyprint.io/compatibility/creality-k2-plus-combo): Compatible, 350 x 350 x 350 mm, Also by Creality · Similar build volume
- [Snapmaker U1](https://staging.simplyprint.io/compatibility/snapmaker-u1): Compatible, 270 x 270 x 270 mm, Similar build volume
- [Voron Voron 2.X](https://staging.simplyprint.io/compatibility/voron-voron-2-x): Compatible, 300 x 300 x 280 mm, Similar build volume
- [Compare the Creality Ender-3 V3 Plus with other printers](https://staging.simplyprint.io/compatibility/compare?compare=creality-ender-3-v3-plus#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the Creality Ender-3 V3 Plus compatible with SimplyPrint?

Yes. You can connect the Creality Ender-3 V3 Plus to SimplyPrint via SimplyPrint Client or Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.

### How do I connect the Creality Ender-3 V3 Plus to SimplyPrint?

Follow our step-by-step setup guide for the Creality Ender-3 V3 Plus. It shows how to connect it via SimplyPrint Client or Klipper (Moonraker), what you need for each, and which to pick.

### What slicer should I use for the Creality Ender-3 V3 Plus?

We recommend CrealityPrint for the Creality Ender-3 V3 Plus. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Creality Ender-3 V3 Plus kept up to date automatically.

### Can I use OrcaSlicer with the Creality Ender-3 V3 Plus?

Yes. OrcaSlicer comes with a profile for the Creality Ender-3 V3 Plus, and you can run it in SimplyPrint's online slicer, so there's nothing to install.

### What filament can the Creality Ender-3 V3 Plus print?

Based on its specs (hotend up to 300C, heated bed up to 100C), the Creality Ender-3 V3 Plus handles PLA, PETG, or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.

### Does the Creality Ender-3 V3 Plus work with OctoPrint or Klipper?

The Creality Ender-3 V3 Plus works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the Creality Ender-3 V3 Plus's bed size and build volume?

The Creality Ender-3 V3 Plus has a 300 x 300 mm print bed and prints up to 330 mm tall, a build volume of about 300 x 300 x 330 mm. See the full specifications table above for bed type, temperatures and more.

### Can the Creality Ender-3 V3 Plus eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.