# Deezmaker Bukobot: specs, SimplyPrint compatibility and setup > **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints. - By Deezmaker, USA - Canonical page: https://staging.simplyprint.io/compatibility/deezmaker-bukobot ## Deezmaker Bukobot at a glance The Deezmaker Bukobot is a 3D printer by Deezmaker with a 200 x 200 x 200 mm build volume. - Build volume: 200 x 200 x 200 mm - Prints well: PLA, PETG, TPU & flexibles ## Connect the Deezmaker Bukobot to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint | Compatible | | Through Klipper (Moonraker) or OctoPrint | | Klipper (Moonraker) | Compatible | Nothing extra: the printer runs Klipper as it ships | | | OctoPrint (Directly, over USB) | Compatible | A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable | | - [How to set up SimplyPrint on Deezmaker Bukobot](https://staging.simplyprint.io/setup-guide/deezmaker/bukobot.md) - [How to set up Mainsail on Deezmaker Bukobot](https://docs.mainsail.xyz/setup) - [How to set up Fluidd on Deezmaker Bukobot](https://docs.fluidd.xyz/installation) - [How to set up OctoPrint on Deezmaker Bukobot](https://staging.simplyprint.io/compatibility/deezmaker-bukobot/octoprint-setup) ### What works with SimplyPrint Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Deezmaker Bukobot: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts. Not available through Klipper (Moonraker): print binary G-code (.bgcode). ## What slicer to use for the Deezmaker Bukobot None of the slicers in SimplyPrint's cloud has a ready-made profile for the Deezmaker Bukobot, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match. - [PrusaSlicer](https://staging.simplyprint.io/features/slicer/prusaslicer): No profile for the Deezmaker Bukobot · Runs in the SimplyPrint cloud - [OrcaSlicer](https://staging.simplyprint.io/features/slicer/orcaslicer): No profile for the Deezmaker Bukobot · Runs in the SimplyPrint cloud - [BambuStudio](https://staging.simplyprint.io/features/slicer/bambustudio): No profile for the Deezmaker Bukobot · Runs in the SimplyPrint cloud - [ElegooSlicer](https://staging.simplyprint.io/features/slicer/elegooslicer): No profile for the Deezmaker Bukobot · Runs in the SimplyPrint cloud - [CrealityPrint](https://staging.simplyprint.io/features/slicer/crealityprint): No profile for the Deezmaker Bukobot · Runs in the SimplyPrint cloud - [Cura](https://staging.simplyprint.io/features/slicer/cura): No profile for the Deezmaker Bukobot · Runs in the SimplyPrint cloud - [Kiri:Moto](https://staging.simplyprint.io/features/slicer/kirimoto): No profile for the Deezmaker Bukobot · Runs in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Deezmaker Bukobot. ## The app for the Deezmaker Bukobot SimplyPrint works as the Deezmaker Bukobot's app: on your phone and in any browser, with a slicer in the cloud. - An app for iPhone and Android, the same in any browser, and a slicer in the cloud. - More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team. - Printers from many brands in one place, side by side. - Hosted in Frankfurt, Germany, under the GDPR. [Connect the Deezmaker Bukobot to SimplyPrint, free](https://staging.simplyprint.io/setup-guide/deezmaker/bukobot) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev) ## Automate the Deezmaker Bukobot ### Ways to automate it - [Your own ejection G-code](https://staging.simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print. - [A robot arm, or anything with an API](https://staging.simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system. - [Clear it by hand, keep the queue](https://staging.simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job. [How AutoPrint works](https://staging.simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up. ## Deezmaker Bukobot specifications: bed size, print height and more ### Size - Build volume: 200 x 200 x 200 mm - Bed type: Square - Bed size: 200 x 200 mm - Max print height: 200 mm ### Printing - Max extruder temperature: 260 °C - Has heated bed: Yes - Max bed temperature: 80 °C - Number of nozzles: 1 - Direct drive: Yes - Probing tool / Auto Bed Leveling: No - Filament width: 1.75 mm ### Connecting - Supports serial printing: Yes - Shipped firmware: Marlin ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) ### The printer - Printer manufacturer / brand: Deezmaker - Printer model name: Bukobot - Made by a company from: USA ## What filament can the Deezmaker Bukobot print? Filament compatibility for the Deezmaker Bukobot: the materials it can handle, judged from its hotend, bed, chamber and enclosure. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. | | PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). | | TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. | | ABS & ASA | With care | Borderline - the bed runs a little cool and an enclosure is essential for ABS and ASA. | | Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. | | Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. | | Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. | ### Best filament for the Deezmaker Bukobot Filaments the Deezmaker Bukobot prints well, Deezmaker's own first, then the best known. - [Bambu Lab PLA Basic](https://staging.simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-240 °C - [Bambu Lab PLA Matte](https://staging.simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C - [SUNLU PLA](https://staging.simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C - [Anycubic PETG](https://staging.simplyprint.io/filaments/anycubic/petg): PETG, 190-270 °C - [Anycubic PLA Basic](https://staging.simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C - [Bambu Lab PETG Basic](https://staging.simplyprint.io/filaments/bambu-lab/petg-basic): PETG, 230-270 °C - [Bambu Lab PETG HF](https://staging.simplyprint.io/filaments/bambu-lab/petg-hf): PETG, 230-270 °C - [Bambu Lab PETG Translucent](https://staging.simplyprint.io/filaments/bambu-lab/petg-translucent): PETG, 220-250 °C ## Compare the Deezmaker Bukobot with similar printers - [Creality Ender-3](https://staging.simplyprint.io/compatibility/creality-ender-3): Compatible, 220 x 220 x 250 mm, Similar build volume - [Creality Ender-3 v2](https://staging.simplyprint.io/compatibility/creality-ender-3-v2): Compatible, 220 x 220 x 250 mm, Similar build volume - [Creality Ender-3 Pro](https://staging.simplyprint.io/compatibility/creality-ender-3-pro): Compatible, 220 x 220 x 250 mm, Similar build volume - [Creality Ender-3 V3 SE](https://staging.simplyprint.io/compatibility/creality-ender-3-v3-se): Compatible, 220 x 220 x 250 mm, Similar build volume - [Compare the Deezmaker Bukobot with other printers](https://staging.simplyprint.io/compatibility/compare?compare=deezmaker-bukobot#choose) Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. ## Frequently asked questions ### Is the Deezmaker Bukobot compatible with SimplyPrint? Yes. You can connect the Deezmaker Bukobot to SimplyPrint via Klipper (Moonraker) or OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app. ### How do I connect the Deezmaker Bukobot to SimplyPrint? Follow our step-by-step setup guide for the Deezmaker Bukobot. It shows how to connect it via Klipper (Moonraker) or OctoPrint, what you need for each, and which to pick. ### What slicer should I use for the Deezmaker Bukobot? Cura, PrusaSlicer and OrcaSlicer all work with the Deezmaker Bukobot, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device. ### Can I use OrcaSlicer with the Deezmaker Bukobot? Yes, but OrcaSlicer has no built-in profile for the Deezmaker Bukobot that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match. ### What filament can the Deezmaker Bukobot print? Based on its specs (hotend up to 260C, heated bed up to 80C), the Deezmaker Bukobot handles PLA, PETG, or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites. ### Does the Deezmaker Bukobot work with OctoPrint or Klipper? The Deezmaker Bukobot works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top. ### What is the Deezmaker Bukobot's bed size and build volume? The Deezmaker Bukobot has a 200 x 200 mm print bed and prints up to 200 mm tall, a build volume of about 200 x 200 x 200 mm. See the full specifications table above for bed type, temperatures and more. ### Can the Deezmaker Bukobot eject prints automatically? There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.