# Flashforge Adventurer 5M Pro: specs, SimplyPrint compatibility and setup > **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints. - By Flashforge, China - Canonical page: https://staging.simplyprint.io/compatibility/flashforge-adventurer-5m-pro ## Flashforge Adventurer 5M Pro at a glance The Flashforge Adventurer 5M Pro is a 3D printer by Flashforge with a 220 x 220 x 220 mm build volume. - Build volume: 220 x 220 x 220 mm - Prints well: PLA, PETG ## Connect the Flashforge Adventurer 5M Pro to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint Client | Compatible | A computer or Raspberry Pi on the same network that stays on, running the SimplyPrint Client | | | Klipper (Moonraker) | With community firmware | The community firmware Klipper Mod for Flashforge Adventurer 5M (Pro), installed in place of the printer's own | [Needs the community firmware Klipper Mod for Flashforge Adventurer 5M (Pro)](https://github.com/xblax/flashforge_ad5m_klipper_mod) | | OctoPrint (Directly, over USB) | Not compatible | | | - [How to set up SimplyPrint on Flashforge Adventurer 5M Pro](https://staging.simplyprint.io/setup-guide/flashforge/adventurer-5m-pro.md) - [How to set up Mainsail on Flashforge Adventurer 5M Pro](https://docs.mainsail.xyz/setup) - [How to set up Fluidd on Flashforge Adventurer 5M Pro](https://docs.fluidd.xyz/installation) ### What works with SimplyPrint Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Flashforge Adventurer 5M Pro: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts. Not available through Klipper (Moonraker): print sliced 3MF files. ## What slicer to use for the Flashforge Adventurer 5M Pro Use OrcaSlicer, ElegooSlicer, or CrealityPrint: each has a ready-made profile for the Flashforge Adventurer 5M Pro. - [OrcaSlicer](https://staging.simplyprint.io/features/slicer/orcaslicer): Ready-made profile for the Flashforge Adventurer 5M Pro · Runs in the SimplyPrint cloud - [ElegooSlicer](https://staging.simplyprint.io/features/slicer/elegooslicer): Ready-made profile for the Flashforge Adventurer 5M Pro · Runs in the SimplyPrint cloud - [CrealityPrint](https://staging.simplyprint.io/features/slicer/crealityprint): Ready-made profile for the Flashforge Adventurer 5M Pro · Runs in the SimplyPrint cloud - [PrusaSlicer](https://staging.simplyprint.io/features/slicer/prusaslicer): No profile for the Flashforge Adventurer 5M Pro · Runs in the SimplyPrint cloud - [BambuStudio](https://staging.simplyprint.io/features/slicer/bambustudio): No profile for the Flashforge Adventurer 5M Pro · Runs in the SimplyPrint cloud - [Cura](https://staging.simplyprint.io/features/slicer/cura): No profile for the Flashforge Adventurer 5M Pro · Runs in the SimplyPrint cloud - [Kiri:Moto](https://staging.simplyprint.io/features/slicer/kirimoto): No profile for the Flashforge Adventurer 5M Pro · Runs in the SimplyPrint cloud - [Flash Studio / Orca-Flashforge](https://www.flashforge.com/pages/orca-flashforge): Made by Flashforge, not in the SimplyPrint cloud - [FlashPrint](https://www.flashforge.com/pages/download-center): Made by Flashforge, not in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Flashforge Adventurer 5M Pro. ## The app for the Flashforge Adventurer 5M Pro SimplyPrint works as the Flashforge Adventurer 5M Pro's app: on your phone and in any browser, with a slicer in the cloud. - An app for iPhone and Android, the same in any browser, and a slicer in the cloud. - More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team. - Printers from many brands in one place, side by side. - Hosted in Frankfurt, Germany, under the GDPR. [Connect the Flashforge Adventurer 5M Pro to SimplyPrint, free](https://staging.simplyprint.io/setup-guide/flashforge/adventurer-5m-pro) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev) [SimplyPrint's print farm software for Flashforge](https://staging.simplyprint.io/print-farms/flashforge) ## Automate the Flashforge Adventurer 5M Pro ### Ways to automate it - [Your own ejection G-code](https://staging.simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print. - [A robot arm, or anything with an API](https://staging.simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system. - [Clear it by hand, keep the queue](https://staging.simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job. [How AutoPrint works](https://staging.simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up. ## Flashforge Adventurer 5M Pro specifications: bed size, print height and more ### Size - Build volume: 220 x 220 x 220 mm - Bed type: Square - Bed size: 220 x 220 mm - Max print height: 220 mm ### Printing - Max extruder temperature: 280 °C - Has heated bed: Yes - Max bed temperature: 110 °C - Number of nozzles: 1 - Direct drive: No - Probing tool / Auto Bed Leveling: Yes - Filament width: 1.75 mm ### Connecting - Supports serial printing: No - Shipped firmware: Klipper ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) - Has start options: Yes (Available options: Bed Leveling) ### The printer - Printer manufacturer / brand: Flashforge - Printer model name: Adventurer 5M Pro - Made by a company from: China ## What filament can the Flashforge Adventurer 5M Pro print? Filament compatibility for the Flashforge Adventurer 5M Pro: the materials it can handle, judged from its hotend, bed, chamber and enclosure. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. | | PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). | | TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. | | ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. | | Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. | | Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. | | Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. | ### Best filament for the Flashforge Adventurer 5M Pro Filaments the Flashforge Adventurer 5M Pro prints well, Flashforge's own first, then the best known. - [FLASHFORGE High Speed PLA](https://staging.simplyprint.io/filaments/flashforge/high-speed-pla): PLA, 190-230 °C - [FLASHFORGE Matte PLA](https://staging.simplyprint.io/filaments/flashforge/matte-pla): PLA, 190-230 °C - [FLASHFORGE PETG](https://staging.simplyprint.io/filaments/flashforge/petg): PETG, 220-250 °C - [FLASHFORGE PLA](https://staging.simplyprint.io/filaments/flashforge/pla): PLA, 190-230 °C - [Bambu Lab PLA Basic](https://staging.simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-240 °C - [Bambu Lab PLA Matte](https://staging.simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C - [SUNLU PLA](https://staging.simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C - [Anycubic PETG](https://staging.simplyprint.io/filaments/anycubic/petg): PETG, 190-270 °C ## Compare the Flashforge Adventurer 5M Pro with similar printers - [Flashforge Adventurer 5M](https://staging.simplyprint.io/compatibility/flashforge-adventurer-5m): Compatible, 220 x 220 x 220 mm, Also by Flashforge · Similar build volume - [Flashforge AD5X](https://staging.simplyprint.io/compatibility/flashforge-ad5x): Compatible, 220 x 220 x 220 mm, Also by Flashforge · Similar build volume - [Creality Ender-3](https://staging.simplyprint.io/compatibility/creality-ender-3): Compatible, 220 x 220 x 250 mm, Similar build volume - [Creality Ender-3 v2](https://staging.simplyprint.io/compatibility/creality-ender-3-v2): Compatible, 220 x 220 x 250 mm, Similar build volume - [Compare the Flashforge Adventurer 5M Pro with other printers](https://staging.simplyprint.io/compatibility/compare?compare=flashforge-adventurer-5m-pro#choose) Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. ## Frequently asked questions ### Is the Flashforge Adventurer 5M Pro compatible with SimplyPrint? Yes. You can connect the Flashforge Adventurer 5M Pro to SimplyPrint via SimplyPrint Client or Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app. ### How do I connect the Flashforge Adventurer 5M Pro to SimplyPrint? Follow our step-by-step setup guide for the Flashforge Adventurer 5M Pro. It shows how to connect it via SimplyPrint Client or Klipper (Moonraker), what you need for each, and which to pick. ### What slicer should I use for the Flashforge Adventurer 5M Pro? We recommend OrcaSlicer for the Flashforge Adventurer 5M Pro. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Flashforge Adventurer 5M Pro kept up to date automatically. ### Can I use OrcaSlicer with the Flashforge Adventurer 5M Pro? Yes. OrcaSlicer comes with a profile for the Flashforge Adventurer 5M Pro, and you can run it in SimplyPrint's online slicer, so there's nothing to install. ### What filament can the Flashforge Adventurer 5M Pro print? Based on its specs (hotend up to 280C, heated bed up to 110C), the Flashforge Adventurer 5M Pro handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites. ### Does the Flashforge Adventurer 5M Pro work with OctoPrint or Klipper? The Flashforge Adventurer 5M Pro works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top. ### What is the Flashforge Adventurer 5M Pro's bed size and build volume? The Flashforge Adventurer 5M Pro has a 220 x 220 mm print bed and prints up to 220 mm tall, a build volume of about 220 x 220 x 220 mm. See the full specifications table above for bed type, temperatures and more. ### Can the Flashforge Adventurer 5M Pro eject prints automatically? There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.