# Flashforge Creator 5 Pro: specs, SimplyPrint compatibility and setup > **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints. - By Flashforge, China - Canonical page: https://staging.simplyprint.io/compatibility/flashforge-creator-5-pro ## Flashforge Creator 5 Pro at a glance The Flashforge Creator 5 Pro is a 3D printer by Flashforge with a 256 x 256 x 256 mm build volume. - Build volume: 256 x 256 x 256 mm - Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC) ## Connect the Flashforge Creator 5 Pro to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint Client | Compatible | A computer or Raspberry Pi on the same network that stays on, running the SimplyPrint Client | | | Klipper (Moonraker) | Not compatible | | | | OctoPrint (Directly, over USB) | Not compatible | | | - [How to set up SimplyPrint on Flashforge Creator 5 Pro](https://staging.simplyprint.io/setup-guide/flashforge/creator-5-pro.md) ### What works with SimplyPrint Connected through SimplyPrint Client, SimplyPrint covers the core of what it offers on the Flashforge Creator 5 Pro: the camera and AI failure detection, remote printing, filament mapping for its multi-material unit and AutoPrint. Not available through SimplyPrint Client: skip objects, moving with the controls, homing, extrude and retract, change print speed, fan speed, baby stepping, send G-code, change filament, bed leveling and Z-Offset Calibration. ## What slicer to use for the Flashforge Creator 5 Pro None of the slicers in SimplyPrint's cloud has a ready-made profile for the Flashforge Creator 5 Pro, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match. - [PrusaSlicer](https://staging.simplyprint.io/features/slicer/prusaslicer): No profile for the Flashforge Creator 5 Pro · Runs in the SimplyPrint cloud - [OrcaSlicer](https://staging.simplyprint.io/features/slicer/orcaslicer): No profile for the Flashforge Creator 5 Pro · Runs in the SimplyPrint cloud - [BambuStudio](https://staging.simplyprint.io/features/slicer/bambustudio): No profile for the Flashforge Creator 5 Pro · Runs in the SimplyPrint cloud - [ElegooSlicer](https://staging.simplyprint.io/features/slicer/elegooslicer): No profile for the Flashforge Creator 5 Pro · Runs in the SimplyPrint cloud - [CrealityPrint](https://staging.simplyprint.io/features/slicer/crealityprint): No profile for the Flashforge Creator 5 Pro · Runs in the SimplyPrint cloud - [Cura](https://staging.simplyprint.io/features/slicer/cura): No profile for the Flashforge Creator 5 Pro · Runs in the SimplyPrint cloud - [Kiri:Moto](https://staging.simplyprint.io/features/slicer/kirimoto): No profile for the Flashforge Creator 5 Pro · Runs in the SimplyPrint cloud - [Flash Studio / Orca-Flashforge](https://www.flashforge.com/pages/orca-flashforge): Made by Flashforge, not in the SimplyPrint cloud - [FlashPrint](https://www.flashforge.com/pages/download-center): Made by Flashforge, not in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Flashforge Creator 5 Pro. ## The app for the Flashforge Creator 5 Pro SimplyPrint works as the Flashforge Creator 5 Pro's app: on your phone and in any browser, with a slicer in the cloud. - An app for iPhone and Android, the same in any browser, and a slicer in the cloud. - More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team. - Printers from many brands in one place, side by side. - Hosted in Frankfurt, Germany, under the GDPR. [Connect the Flashforge Creator 5 Pro to SimplyPrint, free](https://staging.simplyprint.io/setup-guide/flashforge/creator-5-pro) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev) [SimplyPrint's print farm software for Flashforge](https://staging.simplyprint.io/print-farms/flashforge) ## Automate the Flashforge Creator 5 Pro ### Ways to automate it - [Your own ejection G-code](https://staging.simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print. - [A robot arm, or anything with an API](https://staging.simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system. - [Clear it by hand, keep the queue](https://staging.simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job. [How AutoPrint works](https://staging.simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up. ## Flashforge Creator 5 Pro specifications: bed size, print height and more ### Size - Build volume: 256 x 256 x 256 mm - Bed type: Square - Bed size: 256 x 256 mm - Max print height: 256 mm ### Printing - Max extruder temperature: 320 °C - Has heated bed: Yes - Max bed temperature: 120 °C - Heated chamber: Up to 65 °C - Number of nozzles: 4 - Direct drive: Yes - Probing tool / Auto Bed Leveling: Yes - Filament width: 1.75 mm ### Connecting - Supports serial printing: No - Shipped firmware: The maker's own - Shipped local UI: Custom ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) - Slicer profile name(s): `Flashforge Creator 5 Pro`, `Creator 5 Pro` - Has start options: Yes (Available options: Bed Leveling, Flow Calibration, Timelapse) ### The printer - Printer manufacturer / brand: Flashforge - Printer model name: Creator 5 Pro - Made by a company from: China ## What filament can the Flashforge Creator 5 Pro print? Filament compatibility for the Flashforge Creator 5 Pro: the materials it can handle, judged from its hotend, bed, chamber and enclosure. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. | | PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). | | TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. | | ABS & ASA | Great | The high-temperature hotend and hot bed handle ABS and ASA well. An enclosure helps further on large parts. | | Nylon (PA) | Good | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. | | Polycarbonate (PC) | Good | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. | | Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. | ### Best filament for the Flashforge Creator 5 Pro Filaments the Flashforge Creator 5 Pro prints well, Flashforge's own first, then the best known. - [FLASHFORGE ABS](https://staging.simplyprint.io/filaments/flashforge/abs): ABS, 230-260 °C - [FLASHFORGE ASA](https://staging.simplyprint.io/filaments/flashforge/asa): ASA, 235-261 °C - [FLASHFORGE ASA Basic](https://staging.simplyprint.io/filaments/flashforge/asa-basic): ASA, 240-260 °C - [FLASHFORGE High Speed PLA](https://staging.simplyprint.io/filaments/flashforge/high-speed-pla): PLA, 190-230 °C - [Bambu Lab PLA Basic](https://staging.simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-240 °C - [Bambu Lab PLA Matte](https://staging.simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C - [SUNLU PLA](https://staging.simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C - [Anycubic PETG](https://staging.simplyprint.io/filaments/anycubic/petg): PETG, 190-270 °C ## Compare the Flashforge Creator 5 Pro with similar printers - [Flashforge Guider II S](https://staging.simplyprint.io/compatibility/flashforge-guider-ii-s): Compatible, 280 x 250 x 300 mm, Also by Flashforge · Similar build volume - [Flashforge Adventurer 4 Pro](https://staging.simplyprint.io/compatibility/flashforge-adventurer-4-pro): Compatible, 220 x 200 x 250 mm, Also by Flashforge · Similar build volume - [Bambu Lab P1S](https://staging.simplyprint.io/compatibility/bambu-lab-p1s): Compatible, 256 x 256 x 256 mm, Similar build volume - [Creality Ender-3](https://staging.simplyprint.io/compatibility/creality-ender-3): Compatible, 220 x 220 x 250 mm, Similar build volume - [Compare the Flashforge Creator 5 Pro with other printers](https://staging.simplyprint.io/compatibility/compare?compare=flashforge-creator-5-pro#choose) Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. ## Frequently asked questions ### Is the Flashforge Creator 5 Pro compatible with SimplyPrint? Yes. You can connect the Flashforge Creator 5 Pro to SimplyPrint via SimplyPrint Client, then slice, queue, start and monitor prints from your browser or the mobile app. ### How do I connect the Flashforge Creator 5 Pro to SimplyPrint? Follow our step-by-step setup guide for the Flashforge Creator 5 Pro. It shows how to connect it via SimplyPrint Client, what you need for each, and which to pick. ### What slicer should I use for the Flashforge Creator 5 Pro? Cura, PrusaSlicer and OrcaSlicer all work with the Flashforge Creator 5 Pro, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device. ### Can I use OrcaSlicer with the Flashforge Creator 5 Pro? Yes, but OrcaSlicer has no built-in profile for the Flashforge Creator 5 Pro that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match. ### What filament can the Flashforge Creator 5 Pro print? Based on its specs (hotend up to 320C, heated bed up to 120C), the Flashforge Creator 5 Pro handles PLA, PETG, TPU & flexibles, or ABS & ASA well. See the full filament guide above for ABS, nylon, PC and composites. ### Does the Flashforge Creator 5 Pro work with OctoPrint or Klipper? Not that we know of, but you don't need either: SimplyPrint connects to the Flashforge Creator 5 Pro via SimplyPrint Client. ### What is the Flashforge Creator 5 Pro's bed size and build volume? The Flashforge Creator 5 Pro has a 256 x 256 mm print bed and prints up to 256 mm tall, a build volume of about 256 x 256 x 256 mm. See the full specifications table above for bed type, temperatures and more. ### Can the Flashforge Creator 5 Pro eject prints automatically? There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.