# LABISTS SX1 Mini: specs, SimplyPrint compatibility and setup

> **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

- By LABISTS
- Canonical page: https://staging.simplyprint.io/compatibility/labists-sx1-mini

## LABISTS SX1 Mini at a glance

The LABISTS SX1 Mini is a 3D printer by LABISTS with a 120 x 120 x 115 mm build volume.

- Build volume: 120 x 120 x 115 mm
- Prints well: PLA, TPU & flexibles

## Connect the LABISTS SX1 Mini to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Compatible |  | Through Klipper (Moonraker) or OctoPrint |
| Klipper (Moonraker) | Compatible | Nothing extra: the printer runs Klipper as it ships |  |
| OctoPrint (Directly, over USB) | Compatible | A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable |  |

- [How to set up SimplyPrint on LABISTS SX1 Mini](https://staging.simplyprint.io/setup-guide/labists/sx1-mini.md)
- [How to set up Mainsail on LABISTS SX1 Mini](https://docs.mainsail.xyz/setup)
- [How to set up Fluidd on LABISTS SX1 Mini](https://docs.fluidd.xyz/installation)
- [How to set up OctoPrint on LABISTS SX1 Mini](https://staging.simplyprint.io/compatibility/labists-sx1-mini/octoprint-setup)

### What works with SimplyPrint

Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the LABISTS SX1 Mini: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts. Not available through Klipper (Moonraker): print binary G-code (.bgcode).

## What slicer to use for the LABISTS SX1 Mini

None of the slicers in SimplyPrint's cloud has a ready-made profile for the LABISTS SX1 Mini, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://staging.simplyprint.io/features/slicer/prusaslicer): No profile for the LABISTS SX1 Mini · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://staging.simplyprint.io/features/slicer/orcaslicer): No profile for the LABISTS SX1 Mini · Runs in the SimplyPrint cloud
- [BambuStudio](https://staging.simplyprint.io/features/slicer/bambustudio): No profile for the LABISTS SX1 Mini · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://staging.simplyprint.io/features/slicer/elegooslicer): No profile for the LABISTS SX1 Mini · Runs in the SimplyPrint cloud
- [CrealityPrint](https://staging.simplyprint.io/features/slicer/crealityprint): No profile for the LABISTS SX1 Mini · Runs in the SimplyPrint cloud
- [Cura](https://staging.simplyprint.io/features/slicer/cura): No profile for the LABISTS SX1 Mini · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://staging.simplyprint.io/features/slicer/kirimoto): No profile for the LABISTS SX1 Mini · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the LABISTS SX1 Mini.

## The app for the LABISTS SX1 Mini

SimplyPrint works as the LABISTS SX1 Mini's app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the LABISTS SX1 Mini to SimplyPrint, free](https://staging.simplyprint.io/setup-guide/labists/sx1-mini) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the LABISTS SX1 Mini

### Ways to automate it

- [Your own ejection G-code](https://staging.simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://staging.simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://staging.simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://staging.simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## LABISTS SX1 Mini specifications: bed size, print height and more

### Size

- Build volume: 120 x 120 x 115 mm
- Bed type: Square
- Bed size: 120 x 120 mm
- Max print height: 115 mm

### Printing

- Max extruder temperature: 180 °C
- Has heated bed: No
- Number of nozzles: 1
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: No
- Filament width: 1.75 mm

### Connecting

- Supports serial printing: Yes
- Shipped firmware: Marlin

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: LABISTS
- Printer model name: SX1 Mini

## What filament can the LABISTS SX1 Mini print?

Filament compatibility for the LABISTS SX1 Mini: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | With care | Marginal - PETG prefers a hotter bed (~70-80C) than this printer reaches. |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the LABISTS SX1 Mini

Filaments the LABISTS SX1 Mini prints well, LABISTS's own first, then the best known.

- [Bambu Lab PLA Basic](https://staging.simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-240 °C
- [Bambu Lab PLA Matte](https://staging.simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://staging.simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C
- [Anycubic PLA Basic](https://staging.simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Metal](https://staging.simplyprint.io/filaments/bambu-lab/pla-metal): PLA, 190-240 °C
- [Bambu Lab PLA Silk+](https://staging.simplyprint.io/filaments/bambu-lab/pla-silk-plus): PLA, 190-240 °C
- [Bambu Lab PLA Translucent](https://staging.simplyprint.io/filaments/bambu-lab/pla-translucent): PLA, 190-240 °C
- [Bambu Lab PLA Wood](https://staging.simplyprint.io/filaments/bambu-lab/pla-wood): PLA, 190-240 °C

## Compare the LABISTS SX1 Mini with similar printers

- [Voron Voron 0.X](https://staging.simplyprint.io/compatibility/voron-voron-0-x): Compatible, 120 x 120 x 120 mm, Similar build volume
- [Monoprice Select mini v2](https://staging.simplyprint.io/compatibility/monoprice-select-mini-v2): Compatible, 120 x 120 x 120 mm, Similar build volume
- [Weedo Tina2](https://staging.simplyprint.io/compatibility/weedo-tina2): Compatible, 100 x 120 x 100 mm, Similar build volume
- [Malyan M200](https://staging.simplyprint.io/compatibility/malyan-m200): Compatible, 120 x 120 x 120 mm, Similar build volume
- [Compare the LABISTS SX1 Mini with other printers](https://staging.simplyprint.io/compatibility/compare?compare=labists-sx1-mini#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the LABISTS SX1 Mini compatible with SimplyPrint?

Yes. You can connect the LABISTS SX1 Mini to SimplyPrint via Klipper (Moonraker) or OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app.

### How do I connect the LABISTS SX1 Mini to SimplyPrint?

Follow our step-by-step setup guide for the LABISTS SX1 Mini. It shows how to connect it via Klipper (Moonraker) or OctoPrint, what you need for each, and which to pick.

### What slicer should I use for the LABISTS SX1 Mini?

Cura, PrusaSlicer and OrcaSlicer all work with the LABISTS SX1 Mini, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the LABISTS SX1 Mini?

Yes, but OrcaSlicer has no built-in profile for the LABISTS SX1 Mini that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the LABISTS SX1 Mini print?

Based on its specs (hotend up to 180C, no heated bed), the LABISTS SX1 Mini handles PLA or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.

### Does the LABISTS SX1 Mini work with OctoPrint or Klipper?

The LABISTS SX1 Mini works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the LABISTS SX1 Mini's bed size and build volume?

The LABISTS SX1 Mini has a 120 x 120 mm print bed and prints up to 115 mm tall, a build volume of about 120 x 120 x 115 mm. See the full specifications table above for bed type, temperatures and more.

### Can the LABISTS SX1 Mini eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.