# Monoprice MP Mini Delta: specs, SimplyPrint compatibility and setup

> **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

- By Monoprice, USA
- Canonical page: https://staging.simplyprint.io/compatibility/monoprice-mp-mini-delta

## Monoprice MP Mini Delta at a glance

The Monoprice MP Mini Delta is a 3D printer by Monoprice with a 110 x 110 x 120 mm build volume.

- Build volume: 110 x 110 x 120 mm
- Prints well: PLA, PETG

## Connect the Monoprice MP Mini Delta to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Compatible |  | Through Klipper (Moonraker) or OctoPrint |
| Klipper (Moonraker) | Compatible | Nothing extra: the printer runs Klipper as it ships |  |
| OctoPrint (Directly, over USB) | Compatible | A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable |  |

- [How to set up SimplyPrint on Monoprice MP Mini Delta](https://staging.simplyprint.io/setup-guide/monoprice/mp-mini-delta.md)
- [How to set up Mainsail on Monoprice MP Mini Delta](https://docs.mainsail.xyz/setup)
- [How to set up Fluidd on Monoprice MP Mini Delta](https://docs.fluidd.xyz/installation)
- [How to set up OctoPrint on Monoprice MP Mini Delta](https://staging.simplyprint.io/compatibility/monoprice-mp-mini-delta/octoprint-setup)

### What works with SimplyPrint

Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Monoprice MP Mini Delta: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts. Not available through Klipper (Moonraker): print binary G-code (.bgcode).

## What slicer to use for the Monoprice MP Mini Delta

Use Cura: it has a ready-made profile for the Monoprice MP Mini Delta.

- [Cura](https://staging.simplyprint.io/features/slicer/cura): Ready-made profile for the Monoprice MP Mini Delta · Runs in the SimplyPrint cloud
- [PrusaSlicer](https://staging.simplyprint.io/features/slicer/prusaslicer): No profile for the Monoprice MP Mini Delta · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://staging.simplyprint.io/features/slicer/orcaslicer): No profile for the Monoprice MP Mini Delta · Runs in the SimplyPrint cloud
- [BambuStudio](https://staging.simplyprint.io/features/slicer/bambustudio): No profile for the Monoprice MP Mini Delta · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://staging.simplyprint.io/features/slicer/elegooslicer): No profile for the Monoprice MP Mini Delta · Runs in the SimplyPrint cloud
- [CrealityPrint](https://staging.simplyprint.io/features/slicer/crealityprint): No profile for the Monoprice MP Mini Delta · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://staging.simplyprint.io/features/slicer/kirimoto): No profile for the Monoprice MP Mini Delta · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Monoprice MP Mini Delta.

## The app for the Monoprice MP Mini Delta

SimplyPrint works as the Monoprice MP Mini Delta's app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the Monoprice MP Mini Delta to SimplyPrint, free](https://staging.simplyprint.io/setup-guide/monoprice/mp-mini-delta) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the Monoprice MP Mini Delta

### Ways to automate it

- [Your own ejection G-code](https://staging.simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://staging.simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://staging.simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://staging.simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## Monoprice MP Mini Delta specifications: bed size, print height and more

### Size

- Build volume: 110 x 110 x 120 mm
- Bed type: Circle
- Bed size: 110 mm diameter
- Max print height: 120 mm

### Printing

- Max extruder temperature: 260 °C
- Has heated bed: Yes
- Max bed temperature: 50 °C
- Number of nozzles: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: No
- Filament width: 1.75 mm

### Connecting

- Supports serial printing: Yes
- Shipped firmware: Marlin

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Monoprice
- Printer model name: MP Mini Delta
- Made by a company from: USA

## What filament can the Monoprice MP Mini Delta print?

Filament compatibility for the Monoprice MP Mini Delta: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Good | Printable - aim for a bed around 70-80C for the best adhesion. |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the Monoprice MP Mini Delta

Filaments the Monoprice MP Mini Delta prints well, Monoprice's own first, then the best known.

- [Bambu Lab PLA Basic](https://staging.simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-240 °C
- [Bambu Lab PLA Matte](https://staging.simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://staging.simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C
- [Anycubic PETG](https://staging.simplyprint.io/filaments/anycubic/petg): PETG, 190-270 °C
- [Anycubic PLA Basic](https://staging.simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Bambu Lab PETG Basic](https://staging.simplyprint.io/filaments/bambu-lab/petg-basic): PETG, 230-270 °C
- [Bambu Lab PETG HF](https://staging.simplyprint.io/filaments/bambu-lab/petg-hf): PETG, 230-270 °C
- [Bambu Lab PETG Translucent](https://staging.simplyprint.io/filaments/bambu-lab/petg-translucent): PETG, 220-250 °C

## Compare the Monoprice MP Mini Delta with similar printers

- [Monoprice Select mini v2](https://staging.simplyprint.io/compatibility/monoprice-select-mini-v2): Compatible, 120 x 120 x 120 mm, Also by Monoprice · Similar build volume
- [Monoprice MP Mini Select](https://staging.simplyprint.io/compatibility/monoprice-mp-mini-select): Compatible, 120 x 120 x 120 mm, Also by Monoprice · Similar build volume
- [Voron Voron 0.X](https://staging.simplyprint.io/compatibility/voron-voron-0-x): Compatible, 120 x 120 x 120 mm, Similar build volume
- [Easythreed K7](https://staging.simplyprint.io/compatibility/easythreed-k7): Compatible, 100 x 100 x 100 mm, Similar build volume
- [Compare the Monoprice MP Mini Delta with other printers](https://staging.simplyprint.io/compatibility/compare?compare=monoprice-mp-mini-delta#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the Monoprice MP Mini Delta compatible with SimplyPrint?

Yes. You can connect the Monoprice MP Mini Delta to SimplyPrint via Klipper (Moonraker) or OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app.

### How do I connect the Monoprice MP Mini Delta to SimplyPrint?

Follow our step-by-step setup guide for the Monoprice MP Mini Delta. It shows how to connect it via Klipper (Moonraker) or OctoPrint, what you need for each, and which to pick.

### What slicer should I use for the Monoprice MP Mini Delta?

We recommend Cura for the Monoprice MP Mini Delta. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Monoprice MP Mini Delta kept up to date automatically.

### Can I use OrcaSlicer with the Monoprice MP Mini Delta?

Yes, but OrcaSlicer has no built-in profile for the Monoprice MP Mini Delta that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the Monoprice MP Mini Delta print?

Based on its specs (hotend up to 260C, heated bed up to 50C), the Monoprice MP Mini Delta handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.

### Does the Monoprice MP Mini Delta work with OctoPrint or Klipper?

The Monoprice MP Mini Delta works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the Monoprice MP Mini Delta's bed size and build volume?

The Monoprice MP Mini Delta has a 110 x 110 mm print bed and prints up to 120 mm tall, a build volume of about 110 x 110 x 120 mm. See the full specifications table above for bed type, temperatures and more.

### Can the Monoprice MP Mini Delta eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.