# Proteor Gen6 ICARUS (Rabbit): specs, SimplyPrint compatibility and setup

> **Compatible** (We're sure). The maker builds SimplyPrint into the printer, so there's nothing to install.

- By Proteor, France
- Canonical page: https://staging.simplyprint.io/compatibility/proteor-gen6-icarus-rabbit

## Proteor Gen6 ICARUS (Rabbit) at a glance

The Proteor Gen6 ICARUS (Rabbit) is a 3D printer by Proteor with a 450 x 450 x 1000 mm build volume.

- Build volume: 450 x 450 x 1000 mm
- Prints well: PLA, PETG

## Connect the Proteor Gen6 ICARUS (Rabbit) to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| Built in by the manufacturer | Compatible | Nothing extra: it's built into the printer |  |

- [How to set up SimplyPrint on Proteor Gen6 ICARUS (Rabbit)](https://staging.simplyprint.io/setup-guide/proteor/gen6-icarus-rabbit.md)

## What slicer to use for the Proteor Gen6 ICARUS (Rabbit)

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Proteor Gen6 ICARUS (Rabbit), but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://staging.simplyprint.io/features/slicer/prusaslicer): No profile for the Proteor Gen6 ICARUS (Rabbit) · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://staging.simplyprint.io/features/slicer/orcaslicer): No profile for the Proteor Gen6 ICARUS (Rabbit) · Runs in the SimplyPrint cloud
- [BambuStudio](https://staging.simplyprint.io/features/slicer/bambustudio): No profile for the Proteor Gen6 ICARUS (Rabbit) · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://staging.simplyprint.io/features/slicer/elegooslicer): No profile for the Proteor Gen6 ICARUS (Rabbit) · Runs in the SimplyPrint cloud
- [CrealityPrint](https://staging.simplyprint.io/features/slicer/crealityprint): No profile for the Proteor Gen6 ICARUS (Rabbit) · Runs in the SimplyPrint cloud
- [Cura](https://staging.simplyprint.io/features/slicer/cura): No profile for the Proteor Gen6 ICARUS (Rabbit) · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://staging.simplyprint.io/features/slicer/kirimoto): No profile for the Proteor Gen6 ICARUS (Rabbit) · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Proteor Gen6 ICARUS (Rabbit).

## The app for the Proteor Gen6 ICARUS (Rabbit)

SimplyPrint works as the Proteor Gen6 ICARUS (Rabbit)'s app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the Proteor Gen6 ICARUS (Rabbit) to SimplyPrint, free](https://staging.simplyprint.io/setup-guide/proteor/gen6-icarus-rabbit) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the Proteor Gen6 ICARUS (Rabbit)

### Ways to automate it

- [Your own ejection G-code](https://staging.simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://staging.simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://staging.simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://staging.simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## Proteor Gen6 ICARUS (Rabbit) specifications: bed size, print height and more

### Size

- Build volume: 450 x 450 x 1000 mm
- Bed type: Square
- Bed size: 450 x 450 mm
- Max print height: 1000 mm

### Printing

- Max extruder temperature: 450 °C
- Has heated bed: Yes
- Max bed temperature: 120 °C
- Number of nozzles: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 2.85 mm

### Connecting

- Supports serial printing: Yes
- Shipped firmware: Marlin

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Proteor
- Printer model name: Gen6 ICARUS (Rabbit)
- Made by a company from: France (printers made in USA)

## What filament can the Proteor Gen6 ICARUS (Rabbit) print?

Filament compatibility for the Proteor Gen6 ICARUS (Rabbit): the materials it can handle, judged from its hotend, bed, chamber and enclosure.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the Proteor Gen6 ICARUS (Rabbit)

Filaments the Proteor Gen6 ICARUS (Rabbit) prints well, Proteor's own first, then the best known.

- [Proteor Print PETG](https://staging.simplyprint.io/filaments/proteor-print/petg): PETG, 260-260 °C
- [Bambu Lab PLA Basic](https://staging.simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-240 °C
- [Bambu Lab PLA Matte](https://staging.simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://staging.simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C
- [Anycubic PETG](https://staging.simplyprint.io/filaments/anycubic/petg): PETG, 190-270 °C
- [Anycubic PLA Basic](https://staging.simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Bambu Lab PETG Basic](https://staging.simplyprint.io/filaments/bambu-lab/petg-basic): PETG, 230-270 °C
- [Bambu Lab PETG HF](https://staging.simplyprint.io/filaments/bambu-lab/petg-hf): PETG, 230-270 °C

## Compare the Proteor Gen6 ICARUS (Rabbit) with similar printers

- [Proteor Gen6 ICARUS (Typhoon)](https://staging.simplyprint.io/compatibility/proteor-gen6-icarus-typhoon): Compatible, 450 x 450 x 1000 mm, Also by Proteor · Similar build volume
- [Proteor Gen6 ICARUS MagLev (Rabbit)](https://staging.simplyprint.io/compatibility/proteor-gen6-icarus-maglev-rabbit): Compatible, 450 x 450 x 1000 mm, Also by Proteor · Similar build volume
- [Meltingplot MBL 308](https://staging.simplyprint.io/compatibility/meltingplot-mbl-308): Compatible, 850 x 405 x 896 mm, Similar build volume
- [Kentstrapper Bold 755](https://staging.simplyprint.io/compatibility/kentstrapper-bold-755): Compatible, 700 x 500 x 500 mm, Similar build volume
- [Compare the Proteor Gen6 ICARUS (Rabbit) with other printers](https://staging.simplyprint.io/compatibility/compare?compare=proteor-gen6-icarus-rabbit#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the Proteor Gen6 ICARUS (Rabbit) compatible with SimplyPrint?

Yes. The Proteor Gen6 ICARUS (Rabbit) ships with SimplyPrint built in, so you can slice, queue, start and monitor prints from your browser or the mobile app.

### How do I connect the Proteor Gen6 ICARUS (Rabbit) to SimplyPrint?

Follow our step-by-step setup guide for the Proteor Gen6 ICARUS (Rabbit). It shows how to connect it via Built in by the manufacturer, what you need for each, and which to pick.

### What slicer should I use for the Proteor Gen6 ICARUS (Rabbit)?

Cura, PrusaSlicer and OrcaSlicer all work with the Proteor Gen6 ICARUS (Rabbit), and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the Proteor Gen6 ICARUS (Rabbit)?

Yes, but OrcaSlicer has no built-in profile for the Proteor Gen6 ICARUS (Rabbit) that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the Proteor Gen6 ICARUS (Rabbit) print?

Based on its specs (hotend up to 450C, heated bed up to 120C), the Proteor Gen6 ICARUS (Rabbit) handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.

### What is the Proteor Gen6 ICARUS (Rabbit)'s bed size and build volume?

The Proteor Gen6 ICARUS (Rabbit) has a 450 x 450 mm print bed and prints up to 1000 mm tall, a build volume of about 450 x 450 x 1000 mm. See the full specifications table above for bed type, temperatures and more.

### Can the Proteor Gen6 ICARUS (Rabbit) eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.