# Raise3D E2: specs, SimplyPrint compatibility and setup > **Not compatible** (We're sure). To our knowledge it can't connect to SimplyPrint, not even through OctoPrint or Klipper. - By Raise3D, China - Canonical page: https://staging.simplyprint.io/compatibility/raise3d-e2 ## Raise3D E2 at a glance The Raise3D E2 is a 3D printer by Raise3D with a 330 x 240 x 240 mm build volume. - Build volume: 330 x 240 x 240 mm - Prints well: PLA, PETG ## Connect the Raise3D E2 to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint | Not compatible | | | | Klipper (Moonraker) | Not compatible | | | | OctoPrint (Directly, over USB) | Not compatible | | | ## What slicer to use for the Raise3D E2 None of the slicers in SimplyPrint's cloud has a ready-made profile for the Raise3D E2, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match. - [PrusaSlicer](https://staging.simplyprint.io/features/slicer/prusaslicer): No profile for the Raise3D E2 · Runs in the SimplyPrint cloud - [OrcaSlicer](https://staging.simplyprint.io/features/slicer/orcaslicer): No profile for the Raise3D E2 · Runs in the SimplyPrint cloud - [BambuStudio](https://staging.simplyprint.io/features/slicer/bambustudio): No profile for the Raise3D E2 · Runs in the SimplyPrint cloud - [ElegooSlicer](https://staging.simplyprint.io/features/slicer/elegooslicer): No profile for the Raise3D E2 · Runs in the SimplyPrint cloud - [CrealityPrint](https://staging.simplyprint.io/features/slicer/crealityprint): No profile for the Raise3D E2 · Runs in the SimplyPrint cloud - [Cura](https://staging.simplyprint.io/features/slicer/cura): No profile for the Raise3D E2 · Runs in the SimplyPrint cloud - [Kiri:Moto](https://staging.simplyprint.io/features/slicer/kirimoto): No profile for the Raise3D E2 · Runs in the SimplyPrint cloud - [ideaMaker](https://www.raise3d.com/ideamaker/): Made by Raise3D, not in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Raise3D E2. ## Raise3D E2 specifications: bed size, print height and more ### Size - Build volume: 330 x 240 x 240 mm - Bed type: Rectangle - Bed size: 330 x 240 mm - Max print height: 240 mm ### Printing - Max extruder temperature: 300 °C - Has heated bed: Yes - Max bed temperature: 110 °C - Number of nozzles: 1 - Direct drive: No - Probing tool / Auto Bed Leveling: Yes - Filament width: 1.75 mm ### Connecting - Supports serial printing: Yes - Shipped firmware: Marlin ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) ### The printer - Printer manufacturer / brand: Raise3D - Printer model name: E2 - Made by a company from: China ## What filament can the Raise3D E2 print? Filament compatibility for the Raise3D E2: the materials it can handle, judged from its hotend, bed, chamber and enclosure. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. | | PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). | | TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. | | ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. | | Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. | | Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. | | Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. | ## Printers like the Raise3D E2 that work with SimplyPrint - [Raise3D Pro2](https://staging.simplyprint.io/compatibility/raise3d-pro2): Compatible, 305 x 305 x 300 mm, Also by Raise3D · Similar build volume - [Bambu Lab P1S](https://staging.simplyprint.io/compatibility/bambu-lab-p1s): Compatible, 256 x 256 x 256 mm, Similar build volume - [Bambu Lab A1](https://staging.simplyprint.io/compatibility/bambu-lab-a1): Compatible, 256 x 256 x 256 mm, Similar build volume - [Bambu Lab X1-Carbon Combo](https://staging.simplyprint.io/compatibility/bambu-lab-x1-carbon-combo): Compatible, 256 x 256 x 256 mm, Similar build volume ## Frequently asked questions ### Is the Raise3D E2 compatible with SimplyPrint? To our knowledge the Raise3D E2 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer. ### What slicer should I use for the Raise3D E2? Cura, PrusaSlicer and OrcaSlicer all work with the Raise3D E2, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device. ### Can I use OrcaSlicer with the Raise3D E2? Yes, but OrcaSlicer has no built-in profile for the Raise3D E2 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match. ### What filament can the Raise3D E2 print? Based on its specs (hotend up to 300C, heated bed up to 110C), the Raise3D E2 handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites. ### What is the Raise3D E2's bed size and build volume? The Raise3D E2 has a 330 x 240 mm print bed and prints up to 240 mm tall, a build volume of about 330 x 240 x 240 mm. See the full specifications table above for bed type, temperatures and more. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.