# Sovol SV06 Plus ACE: specs, SimplyPrint compatibility and setup

> **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

- By Sovol, China
- Canonical page: https://staging.simplyprint.io/compatibility/sovol-sv06-plus-ace

## Sovol SV06 Plus ACE at a glance

The Sovol SV06 Plus ACE is a 3D printer by Sovol with a 300 x 300 x 350 mm build volume.

- Build volume: 300 x 300 x 350 mm
- Prints well: PLA, PETG, TPU & flexibles

## Connect the Sovol SV06 Plus ACE to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Compatible |  | Through Klipper (Moonraker) |
| Klipper (Moonraker) | Compatible | Nothing extra: the printer runs Klipper as it ships |  |
| OctoPrint (Directly, over USB) | Not compatible |  |  |

- [How to set up SimplyPrint on Sovol SV06 Plus ACE](https://staging.simplyprint.io/setup-guide/sovol/sv06-plus-ace.md)
- [How to set up Mainsail on Sovol SV06 Plus ACE](https://docs.mainsail.xyz/setup)
- [How to set up Fluidd on Sovol SV06 Plus ACE](https://docs.fluidd.xyz/installation)

### What works with SimplyPrint

Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Sovol SV06 Plus ACE: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.

## What slicer to use for the Sovol SV06 Plus ACE

Use OrcaSlicer or ElegooSlicer: each has a ready-made profile for the Sovol SV06 Plus ACE.

- [OrcaSlicer](https://staging.simplyprint.io/features/slicer/orcaslicer): Ready-made profile for the Sovol SV06 Plus ACE · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://staging.simplyprint.io/features/slicer/elegooslicer): Ready-made profile for the Sovol SV06 Plus ACE · Runs in the SimplyPrint cloud
- [PrusaSlicer](https://staging.simplyprint.io/features/slicer/prusaslicer): No profile for the Sovol SV06 Plus ACE · Runs in the SimplyPrint cloud
- [BambuStudio](https://staging.simplyprint.io/features/slicer/bambustudio): No profile for the Sovol SV06 Plus ACE · Runs in the SimplyPrint cloud
- [CrealityPrint](https://staging.simplyprint.io/features/slicer/crealityprint): No profile for the Sovol SV06 Plus ACE · Runs in the SimplyPrint cloud
- [Cura](https://staging.simplyprint.io/features/slicer/cura): No profile for the Sovol SV06 Plus ACE · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://staging.simplyprint.io/features/slicer/kirimoto): No profile for the Sovol SV06 Plus ACE · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Sovol SV06 Plus ACE.

## The app for the Sovol SV06 Plus ACE

SimplyPrint works as the Sovol SV06 Plus ACE's app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the Sovol SV06 Plus ACE to SimplyPrint, free](https://staging.simplyprint.io/setup-guide/sovol/sv06-plus-ace) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the Sovol SV06 Plus ACE

### Ways to automate it

- [Your own ejection G-code](https://staging.simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://staging.simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://staging.simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://staging.simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## Sovol SV06 Plus ACE specifications: bed size, print height and more

### Size

- Build volume: 300 x 300 x 350 mm
- Bed type: Square
- Bed size: 300 x 300 mm
- Max print height: 350 mm

### Printing

- Max extruder temperature: 300 °C
- Has heated bed: Yes
- Max bed temperature: 100 °C
- Number of nozzles: 1
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Connecting

- Supports serial printing: No
- Shipped firmware: Klipper

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Sovol
- Printer model name: SV06 Plus ACE
- Made by a company from: China

## What filament can the Sovol SV06 Plus ACE print?

Filament compatibility for the Sovol SV06 Plus ACE: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the Sovol SV06 Plus ACE

Filaments the Sovol SV06 Plus ACE prints well, Sovol's own first, then the best known.

- [Bambu Lab PLA Basic](https://staging.simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-240 °C
- [Bambu Lab PLA Matte](https://staging.simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://staging.simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C
- [Anycubic PETG](https://staging.simplyprint.io/filaments/anycubic/petg): PETG, 190-270 °C
- [Anycubic PLA Basic](https://staging.simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Bambu Lab PETG Basic](https://staging.simplyprint.io/filaments/bambu-lab/petg-basic): PETG, 230-270 °C
- [Bambu Lab PETG HF](https://staging.simplyprint.io/filaments/bambu-lab/petg-hf): PETG, 230-270 °C
- [Bambu Lab PETG Translucent](https://staging.simplyprint.io/filaments/bambu-lab/petg-translucent): PETG, 220-250 °C

## Compare the Sovol SV06 Plus ACE with similar printers

- [Sovol SV08](https://staging.simplyprint.io/compatibility/sovol-sv08): Compatible, 350 x 350 x 345 mm, Also by Sovol · Similar build volume
- [Sovol SV06 Plus](https://staging.simplyprint.io/compatibility/sovol-sv06-plus): Compatible, 300 x 300 x 340 mm, Also by Sovol · Similar build volume
- [Creality K1 Max](https://staging.simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Similar build volume
- [Voron Voron 2.X](https://staging.simplyprint.io/compatibility/voron-voron-2-x): Compatible, 300 x 300 x 280 mm, Similar build volume
- [Compare the Sovol SV06 Plus ACE with other printers](https://staging.simplyprint.io/compatibility/compare?compare=sovol-sv06-plus-ace#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the Sovol SV06 Plus ACE compatible with SimplyPrint?

Yes. You can connect the Sovol SV06 Plus ACE to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.

### How do I connect the Sovol SV06 Plus ACE to SimplyPrint?

Follow our step-by-step setup guide for the Sovol SV06 Plus ACE. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.

### What slicer should I use for the Sovol SV06 Plus ACE?

We recommend OrcaSlicer for the Sovol SV06 Plus ACE. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Sovol SV06 Plus ACE kept up to date automatically.

### Can I use OrcaSlicer with the Sovol SV06 Plus ACE?

Yes. OrcaSlicer comes with a profile for the Sovol SV06 Plus ACE, and you can run it in SimplyPrint's online slicer, so there's nothing to install.

### What filament can the Sovol SV06 Plus ACE print?

Based on its specs (hotend up to 300C, heated bed up to 100C), the Sovol SV06 Plus ACE handles PLA, PETG, or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.

### Does the Sovol SV06 Plus ACE work with OctoPrint or Klipper?

The Sovol SV06 Plus ACE works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the Sovol SV06 Plus ACE's bed size and build volume?

The Sovol SV06 Plus ACE has a 300 x 300 mm print bed and prints up to 350 mm tall, a build volume of about 300 x 300 x 350 mm. See the full specifications table above for bed type, temperatures and more.

### Can the Sovol SV06 Plus ACE eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.