# Tevo Nerues: specs, SimplyPrint compatibility and setup > **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints. - By Tevo, China - Canonical page: https://staging.simplyprint.io/compatibility/tevo-nerues ## Tevo Nerues at a glance The Tevo Nerues is a 3D printer by Tevo with a 320 x 320 x 400 mm build volume. - Build volume: 320 x 320 x 400 mm - Prints well: PLA, PETG ## Connect the Tevo Nerues to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint | Compatible | | Through Klipper (Moonraker) or OctoPrint | | Klipper (Moonraker) | Compatible | Nothing extra: the printer runs Klipper as it ships | | | OctoPrint (Directly, over USB) | Compatible | A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable | | - [How to set up SimplyPrint on Tevo Nerues](https://staging.simplyprint.io/setup-guide/tevo/nerues.md) - [How to set up Mainsail on Tevo Nerues](https://docs.mainsail.xyz/setup) - [How to set up Fluidd on Tevo Nerues](https://docs.fluidd.xyz/installation) - [How to set up OctoPrint on Tevo Nerues](https://staging.simplyprint.io/compatibility/tevo-nerues/octoprint-setup) ### What works with SimplyPrint Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Tevo Nerues: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts. Not available through Klipper (Moonraker): print binary G-code (.bgcode). ## What slicer to use for the Tevo Nerues None of the slicers in SimplyPrint's cloud has a ready-made profile for the Tevo Nerues, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match. - [PrusaSlicer](https://staging.simplyprint.io/features/slicer/prusaslicer): No profile for the Tevo Nerues · Runs in the SimplyPrint cloud - [OrcaSlicer](https://staging.simplyprint.io/features/slicer/orcaslicer): No profile for the Tevo Nerues · Runs in the SimplyPrint cloud - [BambuStudio](https://staging.simplyprint.io/features/slicer/bambustudio): No profile for the Tevo Nerues · Runs in the SimplyPrint cloud - [ElegooSlicer](https://staging.simplyprint.io/features/slicer/elegooslicer): No profile for the Tevo Nerues · Runs in the SimplyPrint cloud - [CrealityPrint](https://staging.simplyprint.io/features/slicer/crealityprint): No profile for the Tevo Nerues · Runs in the SimplyPrint cloud - [Cura](https://staging.simplyprint.io/features/slicer/cura): No profile for the Tevo Nerues · Runs in the SimplyPrint cloud - [Kiri:Moto](https://staging.simplyprint.io/features/slicer/kirimoto): No profile for the Tevo Nerues · Runs in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Tevo Nerues. ## The app for the Tevo Nerues SimplyPrint works as the Tevo Nerues's app: on your phone and in any browser, with a slicer in the cloud. - An app for iPhone and Android, the same in any browser, and a slicer in the cloud. - More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team. - Printers from many brands in one place, side by side. - Hosted in Frankfurt, Germany, under the GDPR. [Connect the Tevo Nerues to SimplyPrint, free](https://staging.simplyprint.io/setup-guide/tevo/nerues) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev) ## Automate the Tevo Nerues ### Ways to automate it - [Your own ejection G-code](https://staging.simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print. - [A robot arm, or anything with an API](https://staging.simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system. - [Clear it by hand, keep the queue](https://staging.simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job. [How AutoPrint works](https://staging.simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up. ## Tevo Nerues specifications: bed size, print height and more ### Size - Build volume: 320 x 320 x 400 mm - Bed type: Square - Bed size: 320 x 320 mm - Max print height: 400 mm ### Printing - Max extruder temperature: 280 °C - Has heated bed: Yes - Max bed temperature: 100 °C - Number of nozzles: 1 - Direct drive: No - Probing tool / Auto Bed Leveling: No - Filament width: 1.75 mm ### Connecting - Supports serial printing: Yes - Shipped firmware: Marlin ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) ### The printer - Printer manufacturer / brand: Tevo - Printer model name: Nerues - Made by a company from: China ## What filament can the Tevo Nerues print? Filament compatibility for the Tevo Nerues: the materials it can handle, judged from its hotend, bed, chamber and enclosure. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. | | PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). | | TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. | | ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. | | Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. | | Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. | | Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. | ### Best filament for the Tevo Nerues Filaments the Tevo Nerues prints well, Tevo's own first, then the best known. - [Bambu Lab PLA Basic](https://staging.simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-240 °C - [Bambu Lab PLA Matte](https://staging.simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C - [SUNLU PLA](https://staging.simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C - [Anycubic PETG](https://staging.simplyprint.io/filaments/anycubic/petg): PETG, 190-270 °C - [Anycubic PLA Basic](https://staging.simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C - [Bambu Lab PETG Basic](https://staging.simplyprint.io/filaments/bambu-lab/petg-basic): PETG, 230-270 °C - [Bambu Lab PETG HF](https://staging.simplyprint.io/filaments/bambu-lab/petg-hf): PETG, 230-270 °C - [Bambu Lab PETG Translucent](https://staging.simplyprint.io/filaments/bambu-lab/petg-translucent): PETG, 220-250 °C ## Compare the Tevo Nerues with similar printers - [Tevo Tornado](https://staging.simplyprint.io/compatibility/tevo-tornado): Compatible, 300 x 300 x 400 mm, Also by Tevo · Similar build volume - [Tevo Black Widow](https://staging.simplyprint.io/compatibility/tevo-black-widow): Compatible, 370 x 250 x 300 mm, Also by Tevo · Similar build volume - [Creality K1 Max](https://staging.simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Similar build volume - [Creality Ender-5 Plus](https://staging.simplyprint.io/compatibility/creality-ender-5-plus): Compatible, 350 x 350 x 400 mm, Similar build volume - [Compare the Tevo Nerues with other printers](https://staging.simplyprint.io/compatibility/compare?compare=tevo-nerues#choose) Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. ## Frequently asked questions ### Is the Tevo Nerues compatible with SimplyPrint? Yes. You can connect the Tevo Nerues to SimplyPrint via Klipper (Moonraker) or OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app. ### How do I connect the Tevo Nerues to SimplyPrint? Follow our step-by-step setup guide for the Tevo Nerues. It shows how to connect it via Klipper (Moonraker) or OctoPrint, what you need for each, and which to pick. ### What slicer should I use for the Tevo Nerues? Cura, PrusaSlicer and OrcaSlicer all work with the Tevo Nerues, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device. ### Can I use OrcaSlicer with the Tevo Nerues? Yes, but OrcaSlicer has no built-in profile for the Tevo Nerues that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match. ### What filament can the Tevo Nerues print? Based on its specs (hotend up to 280C, heated bed up to 100C), the Tevo Nerues handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites. ### Does the Tevo Nerues work with OctoPrint or Klipper? The Tevo Nerues works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top. ### What is the Tevo Nerues's bed size and build volume? The Tevo Nerues has a 320 x 320 mm print bed and prints up to 400 mm tall, a build volume of about 320 x 320 x 400 mm. See the full specifications table above for bed type, temperatures and more. ### Can the Tevo Nerues eject prints automatically? There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.