China
Easythreed Nano at a glance
The Easythreed Nano is a 3D printer by Easythreed with a 90 x 90 x 110 mm build volume.
- Build volume
- 90 x 90 x 110 mm
- Prints well
- PLA
Connect the Easythreed Nano to SimplyPrint
Does the Easythreed Nano 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
SimplyPrint
Compatible
Through Klipper (Moonraker) or OctoPrint
-
Klipper (Moonraker)
Compatible
What you need: Nothing extra: the printer runs Klipper as it ships
-
OctoPrint
Directly, over USB
Compatible
What you need: A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable
What works with SimplyPrint
Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Easythreed Nano: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts. Not available through Klipper (Moonraker): print binary G-code (.bgcode). The table below compares the two ways of connecting it to SimplyPrint.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
| Connected to SimplyPrint through | ||
|---|---|---|
| SimplyPrint feature | Klipper (Moonraker) Compatible | OctoPrint Compatible |
| Monitoring | ||
| Live status and progress | Yes | Yes |
| Webcam | Yes 1 | Yes 1 |
| AI failure detection | Yes 1 | Yes 1 |
| Time left | Yes | Yes |
| Layer progress | Yes | Yes |
| Temperatures | Yes | Yes |
| Printing | ||
| Starting a print | Yes | Yes |
| Pause, resume and cancel | Yes | Yes |
| Skip objects | Yes | Depends 2 |
| Files | ||
| Print binary G-code (.bgcode) | No | Depends 3 |
| Printer control | ||
| Change temperatures | Yes | Yes |
| Moving with the controls | Yes | Yes |
| Homing | Yes | Yes |
| Extrude and retract | Yes | Yes |
| Change print speed | Yes | Yes |
| Fan speed | Yes | Yes |
| Baby stepping | Yes | Yes |
| Send G-code | Yes | Yes |
| Calibration | ||
| Change filament | Yes | Yes |
| Bed leveling | Yes | Yes |
| Z-Offset Calibration | Yes | Yes |
| Automation | ||
| AutoPrint Pro | Yes | Yes |
| Download the file before the print starts | No 4 | Depends 5 |
Connected to SimplyPrint through Klipper (Moonraker)
Compatible
Monitoring
- Live status and progress Yes
- Webcam Yes 1
- AI failure detection Yes 1
- Time left Yes
- Layer progress Yes
- Temperatures Yes
Printing
- Starting a print Yes
- Pause, resume and cancel Yes
- Skip objects Yes
Files
- Print binary G-code (.bgcode) No
Printer control
- Change temperatures Yes
- Moving with the controls Yes
- Homing Yes
- Extrude and retract Yes
- Change print speed Yes
- Fan speed Yes
- Baby stepping Yes
- Send G-code Yes
Calibration
- Change filament Yes
- Bed leveling Yes
- Z-Offset Calibration Yes
Automation
- AutoPrint Pro Yes
- Download the file before the print starts No 4
Connected to SimplyPrint through OctoPrint
Compatible
Monitoring
- Live status and progress Yes
- Webcam Yes 1
- AI failure detection Yes 1
- Time left Yes
- Layer progress Yes
- Temperatures Yes
Printing
- Starting a print Yes
- Pause, resume and cancel Yes
- Skip objects Depends 2
Files
- Print binary G-code (.bgcode) Depends 3
Printer control
- Change temperatures Yes
- Moving with the controls Yes
- Homing Yes
- Extrude and retract Yes
- Change print speed Yes
- Fan speed Yes
- Baby stepping Yes
- Send G-code Yes
Calibration
- Change filament Yes
- Bed leveling Yes
- Z-Offset Calibration Yes
Automation
- AutoPrint Pro Yes
- Download the file before the print starts Depends 5
Works Depends Not supported
- Needs a camera
- Requires the OctoPrint plugin Cancel Objects
- Requires the OctoPrint plugin BGCode
- SimplyPrint doesn't support this through this connection yet.
- Requires version 4.2.0 or newer of the SimplyPrint plugin
What slicer to use for the Easythreed Nano
None of the slicers in SimplyPrint's cloud has a ready-made profile for the Easythreed Nano, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
No profile for the Easythreed Nano
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Easythreed Nano.
Cloud-Based Slicer for Easythreed Nano
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Easythreed Nano models from any device, anywhere in the world!
Try Online Slicer NowProfiles and other slicers
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Easythreed Nano: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Easythreed Nano
SimplyPrint works as the Easythreed Nano's app: on your phone and in any browser, with a slicer in the cloud.
What you get with SimplyPrint
- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Automate the Easythreed Nano
There's no plate swapper or auto-ejection kit for the Easythreed Nano in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Ways to automate it
- Your own ejection G-code Write the routine that clears your plate, and AutoPrint runs it after every print.
- A robot arm, or anything with an API Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- Clear it by hand, keep the queue AutoPrint waits for you to mark the plate clear, then starts the next job.
AutoPrint comes with the Pro plan and up.
Easythreed Nano specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Size
| Build volume | 90 x 90 x 110 mm |
|---|---|
| Bed type | Square |
| Bed size | 90 x 90 mm |
| Max print height | 110 mm |
Printing
| Max extruder temperature | 230 °C |
|---|---|
| Has heated bed | No |
| Number of nozzles | 1 |
| Direct drive | No |
| Probing tool / Auto Bed Leveling | No |
| Filament width | 1.75 mm |
Connecting
| Supports serial printing | Yes |
|---|---|
| Shipped firmware | Marlin |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Easythreed |
|---|---|
| Printer model name | Nano |
| Made by a company from | China |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Easythreed Nano print?
Filament compatibility for the Easythreed Nano: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | With care | Marginal - PETG prefers a hotter bed (~70-80C) than this printer reaches. |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Easythreed Nano
Filaments the Easythreed Nano prints well, Easythreed's own first, then the best known.
Compare the Easythreed Nano with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
-
Easythreed K7
100 x 100 x 100 mmConnects with: Klipper (Moonraker), OctoPrintAlso by Easythreed · Similar build volumeCompatible Compare side by side Easythreed K7 -
Easythreed K1 Mini
100 x 100 x 100 mmConnects with: Klipper (Moonraker), OctoPrintAlso by Easythreed · Similar build volumeCompatible Compare side by side Easythreed K1 Mini -
Weedo Tina2
100 x 120 x 100 mmConnects with: Klipper (Moonraker), OctoPrintSimilar build volumeCompatible Compare side by side Weedo Tina2 -
Wanhao Duplicator i3 Mini
110 x 110 x 100 mmConnects with: Klipper (Moonraker), OctoPrintSimilar build volume
Frequently asked questions
Is the Easythreed Nano compatible with SimplyPrint?
Yes. You can connect the Easythreed Nano to SimplyPrint via Klipper (Moonraker) or OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Easythreed Nano to SimplyPrint?
Follow our step-by-step setup guide for the Easythreed Nano. It shows how to connect it via Klipper (Moonraker) or OctoPrint, what you need for each, and which to pick.
What slicer should I use for the Easythreed Nano?
Cura, PrusaSlicer and OrcaSlicer all work with the Easythreed Nano, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the Easythreed Nano?
Yes, but OrcaSlicer has no built-in profile for the Easythreed Nano that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the Easythreed Nano print?
Based on its specs (hotend up to 230C, no heated bed), the Easythreed Nano handles PLA well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Easythreed Nano work with OctoPrint or Klipper?
The Easythreed Nano works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Easythreed Nano's bed size and build volume?
The Easythreed Nano has a 90 x 90 mm print bed and prints up to 110 mm tall, a build volume of about 90 x 90 x 110 mm. See the full specifications table above for bed type, temperatures and more.
Can the Easythreed Nano eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.