Skip to main content

ELEGOO Neptune 4 Max: specs, SimplyPrint compatibility and setup

By ELEGOO, China

ELEGOO Neptune 4 Max image

Does it work with SimplyPrint?

Compatible We're sure

It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

Connects with: Klipper (Moonraker)
Set it up Compare

ELEGOO Neptune 4 Max at a glance

The ELEGOO Neptune 4 Max is a 3D printer by ELEGOO with a 420 x 420 x 480 mm build volume.

Build volume
420 x 420 x 480 mm
Prints well
PLA, PETG, TPU & flexibles
All specifications

Connect the ELEGOO Neptune 4 Max to SimplyPrint

Does the ELEGOO Neptune 4 Max 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

What works with SimplyPrint

Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the ELEGOO Neptune 4 Max: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.

Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature Klipper (Moonraker) Compatible
Monitoring
Live status and progress Yes
Webcam Yes 1
AI failure detection Yes 1
Time left Yes
Layer progress Yes
Temperatures Yes
Printing
Starting a print Yes
Pause, resume and cancel Yes
Skip objects Yes
Printer control
Change temperatures Yes
Moving with the controls Yes
Homing Yes
Extrude and retract Yes
Change print speed Yes
Fan speed Yes
Baby stepping Yes
Send G-code Yes
Calibration
Change filament Yes
Bed leveling Yes
Z-Offset Calibration Yes
Automation
AutoPrint Pro Yes
Download the file before the print starts No 2

Connected to SimplyPrint through Klipper (Moonraker)

Compatible

Monitoring

  • Live status and progress Yes
  • Webcam Yes 1
  • AI failure detection Yes 1
  • Time left Yes
  • Layer progress Yes
  • Temperatures Yes

Printing

  • Starting a print Yes
  • Pause, resume and cancel Yes
  • Skip objects Yes

Printer control

  • Change temperatures Yes
  • Moving with the controls Yes
  • Homing Yes
  • Extrude and retract Yes
  • Change print speed Yes
  • Fan speed Yes
  • Baby stepping Yes
  • Send G-code Yes

Calibration

  • Change filament Yes
  • Bed leveling Yes
  • Z-Offset Calibration Yes

Automation

  • AutoPrint Pro Yes
  • Download the file before the print starts No 2

Works Depends Not supported

  1. Needs a camera
  2. SimplyPrint doesn't support this through this connection yet.

What slicer to use for the ELEGOO Neptune 4 Max

Use ElegooSlicer, ELEGOO's own slicer: it has a ready-made profile for the ELEGOO Neptune 4 Max. Also with a profile for it: OrcaSlicer, BambuStudio, CrealityPrint, Cura.

Ready-made profile for the ELEGOO Neptune 4 Max

No profile for the ELEGOO Neptune 4 Max

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the ELEGOO Neptune 4 Max.

Cloud-Based Slicer for ELEGOO Neptune 4 Max: Use ElegooSlicer Online

Use ElegooSlicer and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your ELEGOO Neptune 4 Max models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your ELEGOO Neptune 4 Max: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the ELEGOO Neptune 4 Max

SimplyPrint works as the ELEGOO Neptune 4 Max's app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the ELEGOO Neptune 4 Max to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Running several ELEGOO printers? See SimplyPrint's print farm software for ELEGOO.

Automate the ELEGOO Neptune 4 Max

There's no plate swapper or auto-ejection kit for the ELEGOO Neptune 4 Max in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

ELEGOO Neptune 4 Max specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research.

Size

Build volume 420 x 420 x 480 mm
Bed type Square
Bed size 420 x 420 mm
Max print height 480 mm

Printing

Max extruder temperature 300 °C
Has heated bed Yes
Max bed temperature 85 °C
Number of nozzles 1
Direct drive Yes
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Connecting

Supports serial printing No
Shipped firmware Klipper

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand ELEGOO
Printer model name Neptune 4 Max
Made by a company from China

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the ELEGOO Neptune 4 Max print?

Filament compatibility for the ELEGOO Neptune 4 Max: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles Great The direct-drive extruder feeds flexible filament well. Print slowly for clean results.
ABS & ASA With care Borderline - the bed runs a little cool and an enclosure is essential for ABS and ASA.
Nylon (PA) Not ideal Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure.
Polycarbonate (PC) Not ideal Not recommended - PC needs very high hotend temps and an enclosed chamber.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the ELEGOO Neptune 4 Max

Filaments the ELEGOO Neptune 4 Max prints well, ELEGOO's own first, then the best known.

Find filament for the ELEGOO Neptune 4 Max All 3D printer filaments

Compare the ELEGOO Neptune 4 Max with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the ELEGOO Neptune 4 Max with other printers All ELEGOO printers

Frequently asked questions

Is the ELEGOO Neptune 4 Max compatible with SimplyPrint?

Yes. You can connect the ELEGOO Neptune 4 Max to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.

How do I connect the ELEGOO Neptune 4 Max to SimplyPrint?

Follow our step-by-step setup guide for the ELEGOO Neptune 4 Max. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.

What slicer should I use for the ELEGOO Neptune 4 Max?

We recommend ElegooSlicer for the ELEGOO Neptune 4 Max. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the ELEGOO Neptune 4 Max kept up to date automatically.

Can I use OrcaSlicer with the ELEGOO Neptune 4 Max?

Yes. OrcaSlicer comes with a profile for the ELEGOO Neptune 4 Max, and you can run it in SimplyPrint's online slicer, so there's nothing to install.

What filament can the ELEGOO Neptune 4 Max print?

Based on its specs (hotend up to 300C, heated bed up to 85C), the ELEGOO Neptune 4 Max handles PLA, PETG, or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.

Does the ELEGOO Neptune 4 Max work with OctoPrint or Klipper?

The ELEGOO Neptune 4 Max works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

What is the ELEGOO Neptune 4 Max's bed size and build volume?

The ELEGOO Neptune 4 Max has a 420 x 420 mm print bed and prints up to 480 mm tall, a build volume of about 420 x 420 x 480 mm. See the full specifications table above for bed type, temperatures and more.

Can the ELEGOO Neptune 4 Max eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.