Skip to main content

JGMaker/JGAurora Magic: specs, SimplyPrint compatibility and setup

By JGMaker/JGAurora, China

JGMaker/JGAurora Magic image

Does it work with SimplyPrint?

Compatible We're sure

It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

Connects with: Klipper (Moonraker) OctoPrint
Set it up Compare

JGMaker/JGAurora Magic at a glance

The JGMaker/JGAurora Magic is a 3D printer by JGMaker/JGAurora with a 220 x 220 x 250 mm build volume.

Build volume
220 x 220 x 250 mm
Prints well
PLA, PETG
All specifications

Connect the JGMaker/JGAurora Magic to SimplyPrint

Does the JGMaker/JGAurora Magic 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

What works with SimplyPrint

Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the JGMaker/JGAurora Magic: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts. Not available through Klipper (Moonraker): print binary G-code (.bgcode). The table below compares the two ways of connecting it to SimplyPrint.

Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature Klipper (Moonraker) Compatible OctoPrint Compatible
Monitoring
Live status and progress Yes Yes
Webcam Yes 1 Yes 1
AI failure detection Yes 1 Yes 1
Time left Yes Yes
Layer progress Yes Yes
Temperatures Yes Yes
Printing
Starting a print Yes Yes
Pause, resume and cancel Yes Yes
Skip objects Yes Depends 2
Files
Print binary G-code (.bgcode) No Depends 3
Printer control
Change temperatures Yes Yes
Moving with the controls Yes Yes
Homing Yes Yes
Extrude and retract Yes Yes
Change print speed Yes Yes
Fan speed Yes Yes
Baby stepping Yes Yes
Send G-code Yes Yes
Calibration
Change filament Yes Yes
Bed leveling Yes Yes
Z-Offset Calibration Yes Yes
Automation
AutoPrint Pro Yes Yes
Download the file before the print starts No 4 Depends 5

Connected to SimplyPrint through Klipper (Moonraker)

Compatible

Monitoring

  • Live status and progress Yes
  • Webcam Yes 1
  • AI failure detection Yes 1
  • Time left Yes
  • Layer progress Yes
  • Temperatures Yes

Printing

  • Starting a print Yes
  • Pause, resume and cancel Yes
  • Skip objects Yes

Files

  • Print binary G-code (.bgcode) No

Printer control

  • Change temperatures Yes
  • Moving with the controls Yes
  • Homing Yes
  • Extrude and retract Yes
  • Change print speed Yes
  • Fan speed Yes
  • Baby stepping Yes
  • Send G-code Yes

Calibration

  • Change filament Yes
  • Bed leveling Yes
  • Z-Offset Calibration Yes

Automation

  • AutoPrint Pro Yes
  • Download the file before the print starts No 4

Connected to SimplyPrint through OctoPrint

Compatible

Monitoring

  • Live status and progress Yes
  • Webcam Yes 1
  • AI failure detection Yes 1
  • Time left Yes
  • Layer progress Yes
  • Temperatures Yes

Printing

  • Starting a print Yes
  • Pause, resume and cancel Yes
  • Skip objects Depends 2

Files

  • Print binary G-code (.bgcode) Depends 3

Printer control

  • Change temperatures Yes
  • Moving with the controls Yes
  • Homing Yes
  • Extrude and retract Yes
  • Change print speed Yes
  • Fan speed Yes
  • Baby stepping Yes
  • Send G-code Yes

Calibration

  • Change filament Yes
  • Bed leveling Yes
  • Z-Offset Calibration Yes

Automation

  • AutoPrint Pro Yes
  • Download the file before the print starts Depends 5

Works Depends Not supported

  1. Needs a camera
  2. Requires the OctoPrint plugin Cancel Objects
  3. Requires the OctoPrint plugin BGCode
  4. SimplyPrint doesn't support this through this connection yet.
  5. Requires version 4.2.0 or newer of the SimplyPrint plugin

What slicer to use for the JGMaker/JGAurora Magic

None of the slicers in SimplyPrint's cloud has a ready-made profile for the JGMaker/JGAurora Magic, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

No profile for the JGMaker/JGAurora Magic

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the JGMaker/JGAurora Magic.

Cloud-Based Slicer for JGMaker/JGAurora Magic

All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your JGMaker/JGAurora Magic models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your JGMaker/JGAurora Magic: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the JGMaker/JGAurora Magic

SimplyPrint works as the JGMaker/JGAurora Magic's app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the JGMaker/JGAurora Magic to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the JGMaker/JGAurora Magic

There's no plate swapper or auto-ejection kit for the JGMaker/JGAurora Magic in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

JGMaker/JGAurora Magic specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research.

Size

Build volume 220 x 220 x 250 mm
Bed type Square
Bed size 220 x 220 mm
Max print height 250 mm

Printing

Max extruder temperature 245 °C
Has heated bed Yes
Max bed temperature 110 °C
Number of nozzles 1
Direct drive No
Probing tool / Auto Bed Leveling No
Filament width 1.75 mm

Connecting

Supports serial printing Yes
Shipped firmware Marlin

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand JGMaker/JGAurora
Printer model name Magic
Made by a company from China

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the JGMaker/JGAurora Magic print?

Filament compatibility for the JGMaker/JGAurora Magic: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles With care Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU.
ABS & ASA With care The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA) Not ideal Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure.
Polycarbonate (PC) Not ideal Not recommended - PC needs very high hotend temps and an enclosed chamber.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the JGMaker/JGAurora Magic

Filaments the JGMaker/JGAurora Magic prints well, JGMaker/JGAurora's own first, then the best known.

Find filament for the JGMaker/JGAurora Magic All 3D printer filaments

Compare the JGMaker/JGAurora Magic with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the JGMaker/JGAurora Magic with other printers All JGMaker/JGAurora printers

Frequently asked questions

Is the JGMaker/JGAurora Magic compatible with SimplyPrint?

Yes. You can connect the JGMaker/JGAurora Magic to SimplyPrint via Klipper (Moonraker) or OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app.

How do I connect the JGMaker/JGAurora Magic to SimplyPrint?

Follow our step-by-step setup guide for the JGMaker/JGAurora Magic. It shows how to connect it via Klipper (Moonraker) or OctoPrint, what you need for each, and which to pick.

What slicer should I use for the JGMaker/JGAurora Magic?

Cura, PrusaSlicer and OrcaSlicer all work with the JGMaker/JGAurora Magic, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

Can I use OrcaSlicer with the JGMaker/JGAurora Magic?

Yes, but OrcaSlicer has no built-in profile for the JGMaker/JGAurora Magic that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

What filament can the JGMaker/JGAurora Magic print?

Based on its specs (hotend up to 245C, heated bed up to 110C), the JGMaker/JGAurora Magic handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.

Does the JGMaker/JGAurora Magic work with OctoPrint or Klipper?

The JGMaker/JGAurora Magic works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

What is the JGMaker/JGAurora Magic's bed size and build volume?

The JGMaker/JGAurora Magic has a 220 x 220 mm print bed and prints up to 250 mm tall, a build volume of about 220 x 220 x 250 mm. See the full specifications table above for bed type, temperatures and more.

Can the JGMaker/JGAurora Magic eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.