Skip to main content

Peopoly Magneto X: specs, SimplyPrint compatibility and setup

By Peopoly, Hong Kong

Peopoly Magneto X image

Does it work with SimplyPrint?

Compatible We're sure

It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

Connects with: Klipper (Moonraker)
Set it up Compare

Peopoly Magneto X at a glance

The Peopoly Magneto X is a 3D printer by Peopoly with a 400 x 300 x 300 mm build volume.

Build volume
400 x 300 x 300 mm
Prints well
PLA, PETG
All specifications

Connect the Peopoly Magneto X to SimplyPrint

Does the Peopoly Magneto X 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

What works with SimplyPrint

Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Peopoly Magneto X: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.

Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature Klipper (Moonraker) Compatible
Monitoring
Live status and progress Yes
Webcam Yes 1
AI failure detection Yes 1
Time left Yes
Layer progress Yes
Temperatures Yes
Printing
Starting a print Yes
Pause, resume and cancel Yes
Skip objects Yes
Printer control
Change temperatures Yes
Moving with the controls Yes
Homing Yes
Extrude and retract Yes
Change print speed Yes
Fan speed Yes
Baby stepping Yes
Send G-code Yes
Calibration
Change filament Yes
Bed leveling Yes
Z-Offset Calibration Yes
Automation
AutoPrint Pro Yes
Download the file before the print starts No 2

Connected to SimplyPrint through Klipper (Moonraker)

Compatible

Monitoring

  • Live status and progress Yes
  • Webcam Yes 1
  • AI failure detection Yes 1
  • Time left Yes
  • Layer progress Yes
  • Temperatures Yes

Printing

  • Starting a print Yes
  • Pause, resume and cancel Yes
  • Skip objects Yes

Printer control

  • Change temperatures Yes
  • Moving with the controls Yes
  • Homing Yes
  • Extrude and retract Yes
  • Change print speed Yes
  • Fan speed Yes
  • Baby stepping Yes
  • Send G-code Yes

Calibration

  • Change filament Yes
  • Bed leveling Yes
  • Z-Offset Calibration Yes

Automation

  • AutoPrint Pro Yes
  • Download the file before the print starts No 2

Works Depends Not supported

  1. Needs a camera
  2. SimplyPrint doesn't support this through this connection yet.

What slicer to use for the Peopoly Magneto X

Use OrcaSlicer, ElegooSlicer, or CrealityPrint: each has a ready-made profile for the Peopoly Magneto X.

Ready-made profile for the Peopoly Magneto X

No profile for the Peopoly Magneto X

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Peopoly Magneto X.

Cloud-Based Slicer for Peopoly Magneto X: Use OrcaSlicer Online

Use OrcaSlicer and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Peopoly Magneto X models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Peopoly Magneto X: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the Peopoly Magneto X

SimplyPrint works as the Peopoly Magneto X's app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the Peopoly Magneto X to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the Peopoly Magneto X

There's no plate swapper or auto-ejection kit for the Peopoly Magneto X in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

Peopoly Magneto X specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research.

Size

Build volume 400 x 300 x 300 mm
Bed type Rectangle
Bed size 400 x 300 mm
Max print height 300 mm

Printing

Max extruder temperature 300 °C
Has heated bed Yes
Max bed temperature 130 °C
Number of nozzles 1
Direct drive No
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Connecting

Supports serial printing No
Shipped firmware Klipper

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Peopoly
Printer model name Magneto X
Made by a company from Hong Kong

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Peopoly Magneto X print?

Filament compatibility for the Peopoly Magneto X: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles With care Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU.
ABS & ASA With care The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA) With care Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC) With care On the edge - PC really wants an enclosed, hot chamber to avoid warping.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the Peopoly Magneto X

Filaments the Peopoly Magneto X prints well, Peopoly's own first, then the best known.

Find filament for the Peopoly Magneto X All 3D printer filaments

Compare the Peopoly Magneto X with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the Peopoly Magneto X with other printers All Peopoly printers

Frequently asked questions

Is the Peopoly Magneto X compatible with SimplyPrint?

Yes. You can connect the Peopoly Magneto X to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.

How do I connect the Peopoly Magneto X to SimplyPrint?

Follow our step-by-step setup guide for the Peopoly Magneto X. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.

What slicer should I use for the Peopoly Magneto X?

We recommend OrcaSlicer for the Peopoly Magneto X. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Peopoly Magneto X kept up to date automatically.

Can I use OrcaSlicer with the Peopoly Magneto X?

Yes. OrcaSlicer comes with a profile for the Peopoly Magneto X, and you can run it in SimplyPrint's online slicer, so there's nothing to install.

What filament can the Peopoly Magneto X print?

Based on its specs (hotend up to 300C, heated bed up to 130C), the Peopoly Magneto X handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.

Does the Peopoly Magneto X work with OctoPrint or Klipper?

The Peopoly Magneto X works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

What is the Peopoly Magneto X's bed size and build volume?

The Peopoly Magneto X has a 400 x 300 mm print bed and prints up to 300 mm tall, a build volume of about 400 x 300 x 300 mm. See the full specifications table above for bed type, temperatures and more.

Can the Peopoly Magneto X eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.