Skip to main content

Proteor Gen6 ICARUS (Rabbit) - ABL: specs, SimplyPrint compatibility and setup

By Proteor, France

Proteor Gen6 ICARUS (Rabbit) - ABL image

Does it work with SimplyPrint?

Compatible We're sure

The maker builds SimplyPrint into the printer, so there's nothing to install.

Connects with: Built in by the manufacturer
Set it up Compare

Proteor Gen6 ICARUS (Rabbit) - ABL at a glance

The Proteor Gen6 ICARUS (Rabbit) - ABL is a 3D printer by Proteor with a 450 x 450 x 1000 mm build volume.

Build volume
450 x 450 x 1000 mm
Prints well
PLA, PETG
All specifications

Connect the Proteor Gen6 ICARUS (Rabbit) - ABL to SimplyPrint

Does the Proteor Gen6 ICARUS (Rabbit) - ABL 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

What slicer to use for the Proteor Gen6 ICARUS (Rabbit) - ABL

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Proteor Gen6 ICARUS (Rabbit) - ABL, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

No profile for the Proteor Gen6 ICARUS (Rabbit) - ABL

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Proteor Gen6 ICARUS (Rabbit) - ABL.

Cloud-Based Slicer for Proteor Gen6 ICARUS (Rabbit) - ABL

All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Proteor Gen6 ICARUS (Rabbit) - ABL models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Proteor Gen6 ICARUS (Rabbit) - ABL: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the Proteor Gen6 ICARUS (Rabbit) - ABL

SimplyPrint works as the Proteor Gen6 ICARUS (Rabbit) - ABL's app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the Proteor Gen6 ICARUS (Rabbit) - ABL to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the Proteor Gen6 ICARUS (Rabbit) - ABL

There's no plate swapper or auto-ejection kit for the Proteor Gen6 ICARUS (Rabbit) - ABL in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

Proteor Gen6 ICARUS (Rabbit) - ABL specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research.

Size

Build volume 450 x 450 x 1000 mm
Bed type Square
Bed size 450 x 450 mm
Max print height 1000 mm

Printing

Max extruder temperature 450 °C
Has heated bed Yes
Max bed temperature 120 °C
Number of nozzles 1
Direct drive No
Probing tool / Auto Bed Leveling Yes
Filament width 2.85 mm

Connecting

Supports serial printing Yes
Shipped firmware Marlin

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Proteor
Printer model name Gen6 ICARUS (Rabbit) - ABL
Made by a company from France (printers made in USA)

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Proteor Gen6 ICARUS (Rabbit) - ABL print?

Filament compatibility for the Proteor Gen6 ICARUS (Rabbit) - ABL: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles With care Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU.
ABS & ASA With care The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA) With care Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC) With care On the edge - PC really wants an enclosed, hot chamber to avoid warping.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the Proteor Gen6 ICARUS (Rabbit) - ABL

Filaments the Proteor Gen6 ICARUS (Rabbit) - ABL prints well, Proteor's own first, then the best known.

Find filament for the Proteor Gen6 ICARUS (Rabbit) - ABL All 3D printer filaments

Compare the Proteor Gen6 ICARUS (Rabbit) - ABL with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the Proteor Gen6 ICARUS (Rabbit) - ABL with other printers All Proteor printers

Frequently asked questions

Is the Proteor Gen6 ICARUS (Rabbit) - ABL compatible with SimplyPrint?

Yes. The Proteor Gen6 ICARUS (Rabbit) - ABL ships with SimplyPrint built in, so you can slice, queue, start and monitor prints from your browser or the mobile app.

How do I connect the Proteor Gen6 ICARUS (Rabbit) - ABL to SimplyPrint?

Follow our step-by-step setup guide for the Proteor Gen6 ICARUS (Rabbit) - ABL. It shows how to connect it via Built in by the manufacturer, what you need for each, and which to pick.

What slicer should I use for the Proteor Gen6 ICARUS (Rabbit) - ABL?

Cura, PrusaSlicer and OrcaSlicer all work with the Proteor Gen6 ICARUS (Rabbit) - ABL, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

Can I use OrcaSlicer with the Proteor Gen6 ICARUS (Rabbit) - ABL?

Yes, but OrcaSlicer has no built-in profile for the Proteor Gen6 ICARUS (Rabbit) - ABL that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

What filament can the Proteor Gen6 ICARUS (Rabbit) - ABL print?

Based on its specs (hotend up to 450C, heated bed up to 120C), the Proteor Gen6 ICARUS (Rabbit) - ABL handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.

What is the Proteor Gen6 ICARUS (Rabbit) - ABL's bed size and build volume?

The Proteor Gen6 ICARUS (Rabbit) - ABL has a 450 x 450 mm print bed and prints up to 1000 mm tall, a build volume of about 450 x 450 x 1000 mm. See the full specifications table above for bed type, temperatures and more.

Can the Proteor Gen6 ICARUS (Rabbit) - ABL eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.