Skip to main content

Proteor ICARUS-Lite (Rabbit G1): specs, SimplyPrint compatibility and setup

By Proteor, France

Proteor ICARUS-Lite (Rabbit G1) image

Does it work with SimplyPrint?

Compatible We're sure

The maker builds SimplyPrint into the printer, so there's nothing to install.

Connects with: Built in by the manufacturer
Set it up Compare

Proteor ICARUS-Lite (Rabbit G1) at a glance

The Proteor ICARUS-Lite (Rabbit G1) is a 3D printer by Proteor with a 305 x 305 x 610 mm build volume.

Build volume
305 x 305 x 610 mm
Prints well
PLA, PETG
All specifications

Connect the Proteor ICARUS-Lite (Rabbit G1) to SimplyPrint

Does the Proteor ICARUS-Lite (Rabbit G1) 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

What slicer to use for the Proteor ICARUS-Lite (Rabbit G1)

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Proteor ICARUS-Lite (Rabbit G1), but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

No profile for the Proteor ICARUS-Lite (Rabbit G1)

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Proteor ICARUS-Lite (Rabbit G1).

Cloud-Based Slicer for Proteor ICARUS-Lite (Rabbit G1)

All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Proteor ICARUS-Lite (Rabbit G1) models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Proteor ICARUS-Lite (Rabbit G1): check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the Proteor ICARUS-Lite (Rabbit G1)

SimplyPrint works as the Proteor ICARUS-Lite (Rabbit G1)'s app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the Proteor ICARUS-Lite (Rabbit G1) to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the Proteor ICARUS-Lite (Rabbit G1)

There's no plate swapper or auto-ejection kit for the Proteor ICARUS-Lite (Rabbit G1) in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

Proteor ICARUS-Lite (Rabbit G1) specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research.

Size

Build volume 305 x 305 x 610 mm
Bed type Square
Bed size 305 x 305 mm
Max print height 610 mm

Printing

Max extruder temperature 450 °C
Has heated bed Yes
Max bed temperature 120 °C
Number of nozzles 1
Direct drive No
Probing tool / Auto Bed Leveling Yes
Filament width 2.85 mm

Connecting

Supports serial printing Yes
Shipped firmware Marlin

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Proteor
Printer model name ICARUS-Lite (Rabbit G1)
Made by a company from France (printers made in USA)

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Proteor ICARUS-Lite (Rabbit G1) print?

Filament compatibility for the Proteor ICARUS-Lite (Rabbit G1): the materials it can handle, judged from its hotend, bed, chamber and enclosure.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles With care Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU.
ABS & ASA With care The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA) With care Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC) With care On the edge - PC really wants an enclosed, hot chamber to avoid warping.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the Proteor ICARUS-Lite (Rabbit G1)

Filaments the Proteor ICARUS-Lite (Rabbit G1) prints well, Proteor's own first, then the best known.

Find filament for the Proteor ICARUS-Lite (Rabbit G1) All 3D printer filaments

Compare the Proteor ICARUS-Lite (Rabbit G1) with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the Proteor ICARUS-Lite (Rabbit G1) with other printers All Proteor printers

Frequently asked questions

Is the Proteor ICARUS-Lite (Rabbit G1) compatible with SimplyPrint?

Yes. The Proteor ICARUS-Lite (Rabbit G1) ships with SimplyPrint built in, so you can slice, queue, start and monitor prints from your browser or the mobile app.

How do I connect the Proteor ICARUS-Lite (Rabbit G1) to SimplyPrint?

Follow our step-by-step setup guide for the Proteor ICARUS-Lite (Rabbit G1). It shows how to connect it via Built in by the manufacturer, what you need for each, and which to pick.

What slicer should I use for the Proteor ICARUS-Lite (Rabbit G1)?

Cura, PrusaSlicer and OrcaSlicer all work with the Proteor ICARUS-Lite (Rabbit G1), and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

Can I use OrcaSlicer with the Proteor ICARUS-Lite (Rabbit G1)?

Yes, but OrcaSlicer has no built-in profile for the Proteor ICARUS-Lite (Rabbit G1) that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

What filament can the Proteor ICARUS-Lite (Rabbit G1) print?

Based on its specs (hotend up to 450C, heated bed up to 120C), the Proteor ICARUS-Lite (Rabbit G1) handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.

What is the Proteor ICARUS-Lite (Rabbit G1)'s bed size and build volume?

The Proteor ICARUS-Lite (Rabbit G1) has a 305 x 305 mm print bed and prints up to 610 mm tall, a build volume of about 305 x 305 x 610 mm. See the full specifications table above for bed type, temperatures and more.

Can the Proteor ICARUS-Lite (Rabbit G1) eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.