Skip to main content

Ultimaker 3: specs, SimplyPrint compatibility and setup

By Ultimaker, Netherlands

Ultimaker 3 image

Does it work with SimplyPrint?

Compatible We're sure

It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

Connects with: SimplyPrint Client
Set it up Compare

Ultimaker 3 at a glance

The Ultimaker 3 is a 3D printer by Ultimaker with a 215 x 215 x 200 mm build volume.

Build volume
215 x 215 x 200 mm
Prints well
PLA, PETG
All specifications

Connect the Ultimaker 3 to SimplyPrint

Does the Ultimaker 3 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

  • SimplyPrint

    SimplyPrint Client

    Compatible

    What you need: A computer or Raspberry Pi on the same network that stays on, running the SimplyPrint Client

    How to set up SimplyPrint on Ultimaker 3
  • Mainsail Fluidd

    Klipper (Moonraker)

    Not compatible

  • OctoPrint

    OctoPrint

    Directly, over USB

    Not compatible

What works with SimplyPrint

Connected through SimplyPrint Client, SimplyPrint covers the core of what it offers on the Ultimaker 3: the camera and AI failure detection, remote printing, skipping objects and AutoPrint. Not available through SimplyPrint Client: change temperatures, extrude and retract, change print speed, fan speed, baby stepping, send G-code, change filament, bed leveling and Z-Offset Calibration.

Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature SimplyPrint Client Compatible
Monitoring
Live status and progress Yes
Webcam Yes 1
AI failure detection Yes 1
Time left Yes
Layer progress Yes
Temperatures Yes
Printing
Starting a print Yes
Pause, resume and cancel Yes
Skip objects Yes
Files
Print UFP files Yes
Printer control
Change temperatures No
Moving with the controls Yes
Homing Yes
Extrude and retract No
Change print speed No
Fan speed No
Baby stepping No
Send G-code No
Calibration
Change filament No
Bed leveling No
Z-Offset Calibration No
Automation
AutoPrint Pro Yes
Download the file before the print starts Yes

Connected to SimplyPrint through SimplyPrint Client

Compatible

Monitoring

  • Live status and progress Yes
  • Webcam Yes 1
  • AI failure detection Yes 1
  • Time left Yes
  • Layer progress Yes
  • Temperatures Yes

Printing

  • Starting a print Yes
  • Pause, resume and cancel Yes
  • Skip objects Yes

Files

  • Print UFP files Yes

Printer control

  • Change temperatures No
  • Moving with the controls Yes
  • Homing Yes
  • Extrude and retract No
  • Change print speed No
  • Fan speed No
  • Baby stepping No
  • Send G-code No

Calibration

  • Change filament No
  • Bed leveling No
  • Z-Offset Calibration No

Automation

  • AutoPrint Pro Yes
  • Download the file before the print starts Yes

Works Depends Not supported

  1. Needs a camera

What slicer to use for the Ultimaker 3

Use Cura, Ultimaker's own slicer: it has a ready-made profile for the Ultimaker 3.

Ready-made profile for the Ultimaker 3

  • Cura
    Official slicer for Ultimaker · Runs in the SimplyPrint cloud

No profile for the Ultimaker 3

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Ultimaker 3.

Cloud-Based Slicer for Ultimaker 3: Use Cura Online

Use Cura and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Ultimaker 3 models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Ultimaker 3: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the Ultimaker 3

SimplyPrint works as the Ultimaker 3's app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the Ultimaker 3 to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the Ultimaker 3

There's no plate swapper or auto-ejection kit for the Ultimaker 3 in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

Ultimaker 3 specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research.

Size

Build volume 215 x 215 x 200 mm
Bed type Square
Bed size 215 x 215 mm
Max print height 200 mm

Printing

Max extruder temperature 280 °C
Has heated bed Yes
Max bed temperature 100 °C
Number of nozzles 1
Direct drive No
Probing tool / Auto Bed Leveling Yes
Filament width 2.85 mm

Connecting

Supports serial printing Yes
Shipped firmware Marlin

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Ultimaker
Printer model name 3
Made by a company from Netherlands

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Ultimaker 3 print?

Filament compatibility for the Ultimaker 3: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles With care Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU.
ABS & ASA With care The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA) With care Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC) With care On the edge - PC really wants an enclosed, hot chamber to avoid warping.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the Ultimaker 3

Filaments the Ultimaker 3 prints well, Ultimaker's own first, then the best known.

Find filament for the Ultimaker 3 All 3D printer filaments

Compare the Ultimaker 3 with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the Ultimaker 3 with other printers All Ultimaker printers

Frequently asked questions

Is the Ultimaker 3 compatible with SimplyPrint?

Yes. You can connect the Ultimaker 3 to SimplyPrint via SimplyPrint Client, then slice, queue, start and monitor prints from your browser or the mobile app.

How do I connect the Ultimaker 3 to SimplyPrint?

Follow our step-by-step setup guide for the Ultimaker 3. It shows how to connect it via SimplyPrint Client, what you need for each, and which to pick.

What slicer should I use for the Ultimaker 3?

We recommend Cura for the Ultimaker 3. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Ultimaker 3 kept up to date automatically.

Can I use OrcaSlicer with the Ultimaker 3?

Yes, but OrcaSlicer has no built-in profile for the Ultimaker 3 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

What filament can the Ultimaker 3 print?

Based on its specs (hotend up to 280C, heated bed up to 100C), the Ultimaker 3 handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.

Does the Ultimaker 3 work with OctoPrint or Klipper?

Not that we know of, but you don't need either: SimplyPrint connects to the Ultimaker 3 via SimplyPrint Client.

What is the Ultimaker 3's bed size and build volume?

The Ultimaker 3 has a 215 x 215 mm print bed and prints up to 200 mm tall, a build volume of about 215 x 215 x 200 mm. See the full specifications table above for bed type, temperatures and more.

Can the Ultimaker 3 eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.