Voron Voron Trident at a glance
The Voron Voron Trident is a 3D printer by Voron with a 350 x 350 x 240 mm build volume.
- Build volume
- 350 x 350 x 240 mm
- Prints well
- PLA, PETG, TPU & flexibles
Connect the Voron Voron Trident to SimplyPrint
Does the Voron Voron Trident 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
Klipper (Moonraker)
Compatible
What you need: Nothing extra: the printer runs Klipper as it ships
-
OctoPrint
Directly, over USB
Not compatible
What works with SimplyPrint
Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Voron Voron Trident: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control, filament mapping for its multi-material unit and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
| Connected to SimplyPrint through | |
|---|---|
| SimplyPrint feature | Klipper (Moonraker) Compatible |
| Monitoring | |
| Live status and progress | Yes |
| Webcam | Yes 1 |
| AI failure detection | Yes 1 |
| Time left | Yes |
| Layer progress | Yes |
| Temperatures | Yes |
| Printing | |
| Starting a print | Yes |
| Pause, resume and cancel | Yes |
| Skip objects | Yes |
| Printer control | |
| Change temperatures | Yes |
| Moving with the controls | Yes |
| Homing | Yes |
| Extrude and retract | Yes |
| Change print speed | Yes |
| Fan speed | Yes |
| Baby stepping | Yes |
| Send G-code | Yes |
| Calibration | |
| Change filament | Yes |
| Bed leveling | Yes |
| Z-Offset Calibration | Yes |
| Multi-material | |
| Map filament to multi-material slots | Yes 2 |
| Automation | |
| AutoPrint Pro | Yes |
| Download the file before the print starts | No 3 |
Connected to SimplyPrint through Klipper (Moonraker)
Compatible
Monitoring
- Live status and progress Yes
- Webcam Yes 1
- AI failure detection Yes 1
- Time left Yes
- Layer progress Yes
- Temperatures Yes
Printing
- Starting a print Yes
- Pause, resume and cancel Yes
- Skip objects Yes
Printer control
- Change temperatures Yes
- Moving with the controls Yes
- Homing Yes
- Extrude and retract Yes
- Change print speed Yes
- Fan speed Yes
- Baby stepping Yes
- Send G-code Yes
Calibration
- Change filament Yes
- Bed leveling Yes
- Z-Offset Calibration Yes
Multi-material
- Map filament to multi-material slots Yes 2
Automation
- AutoPrint Pro Yes
- Download the file before the print starts No 3
Works Depends Not supported
- Needs a camera
- Needs a multi-material unit
- SimplyPrint doesn't support this through this connection yet.
What slicer to use for the Voron Voron Trident
Use PrusaSlicer, OrcaSlicer, BambuStudio, ElegooSlicer, CrealityPrint, or Cura: each has a ready-made profile for the Voron Voron Trident.
Ready-made profile for the Voron Voron Trident
-
PrusaSlicerRuns in the SimplyPrint cloud -
OrcaSlicerRuns in the SimplyPrint cloud -
BambuStudioRuns in the SimplyPrint cloud -
ElegooSlicerRuns in the SimplyPrint cloud -
CrealityPrintRuns in the SimplyPrint cloud -
CuraRuns in the SimplyPrint cloud
No profile for the Voron Voron Trident
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Voron Voron Trident.
Cloud-Based Slicer for Voron Voron Trident: Use PrusaSlicer Online
Use PrusaSlicer and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Voron Voron Trident models from any device, anywhere in the world!
Try Online Slicer NowProfiles and other slicers
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Voron Voron Trident: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Voron Voron Trident
SimplyPrint works as the Voron Voron Trident's app: on your phone and in any browser, with a slicer in the cloud.
What you get with SimplyPrint
- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Automate the Voron Voron Trident
There's no plate swapper or auto-ejection kit for the Voron Voron Trident in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Ways to automate it
- Your own ejection G-code Write the routine that clears your plate, and AutoPrint runs it after every print.
- A robot arm, or anything with an API Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- Clear it by hand, keep the queue AutoPrint waits for you to mark the plate clear, then starts the next job.
AutoPrint comes with the Pro plan and up.
Voron Voron Trident specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Size
| Build volume | 350 x 350 x 240 mm |
|---|---|
| Bed type | Square |
| Bed size | 350 x 350 mm |
| Max print height | 240 mm |
Printing
| Max extruder temperature | 280 °C |
|---|---|
| Has heated bed | Yes |
| Max bed temperature | 100 °C |
| Number of nozzles | 1 |
| Direct drive | Yes |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Connecting
| Supports serial printing | No |
|---|---|
| Shipped firmware | Klipper |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|---|
| Slicer profile name(s) |
voron trident base, voron trident 250, voron trident 300, voron trident 350 |
The printer
| Printer manufacturer / brand | Voron |
|---|---|
| Printer model name | Voron Trident |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Voron Voron Trident print?
Filament compatibility for the Voron Voron Trident: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Voron Voron Trident
Filaments the Voron Voron Trident prints well, Voron's own first, then the best known.
Compare the Voron Voron Trident with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
-
Voron Voron 2.X
300 x 300 x 280 mmConnects with: Klipper (Moonraker)Also by Voron · Similar build volumeCompatible Compare side by side Voron Voron 2.X -
Voron Voron V1.X
300 x 300 x 230 mmConnects with: Klipper (Moonraker)Also by Voron · Similar build volumeCompatible Compare side by side Voron Voron V1.X -
Creality K1 Max
300 x 300 x 300 mmConnects with: SimplyPrint Client, Klipper (Moonraker)Similar build volumeCompatible Compare side by side Creality K1 Max -
Snapmaker U1
270 x 270 x 270 mmConnects with: SimplyPrint Client, Klipper (Moonraker)Similar build volumeCompatible Compare side by side Snapmaker U1
Frequently asked questions
Is the Voron Voron Trident compatible with SimplyPrint?
Yes. You can connect the Voron Voron Trident to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Voron Voron Trident to SimplyPrint?
Follow our step-by-step setup guide for the Voron Voron Trident. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.
What slicer should I use for the Voron Voron Trident?
We recommend PrusaSlicer for the Voron Voron Trident. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Voron Voron Trident kept up to date automatically.
Can I use OrcaSlicer with the Voron Voron Trident?
Yes. OrcaSlicer comes with a profile for the Voron Voron Trident, and you can run it in SimplyPrint's online slicer, so there's nothing to install.
What filament can the Voron Voron Trident print?
Based on its specs (hotend up to 280C, heated bed up to 100C), the Voron Voron Trident handles PLA, PETG, or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Voron Voron Trident work with OctoPrint or Klipper?
The Voron Voron Trident works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Voron Voron Trident's bed size and build volume?
The Voron Voron Trident has a 350 x 350 mm print bed and prints up to 240 mm tall, a build volume of about 350 x 350 x 240 mm. See the full specifications table above for bed type, temperatures and more.
Can the Voron Voron Trident eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.