Skip to main content

Kentstrapper Mavis: specs, SimplyPrint compatibility and setup

By Kentstrapper, Italy

Kentstrapper Mavis image

Does it work with SimplyPrint?

Compatible We're sure

The maker builds SimplyPrint into the printer, so there's nothing to install.

Connects with: Built in by the manufacturer
Set it up Compare

Kentstrapper Mavis at a glance

The Kentstrapper Mavis is a 3D printer by Kentstrapper with a 400 x 400 x 700 mm build volume.

Build volume
400 x 400 x 700 mm
Prints well
PLA, PETG, TPU & flexibles
All specifications

Connect the Kentstrapper Mavis to SimplyPrint

Does the Kentstrapper Mavis 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

What slicer to use for the Kentstrapper Mavis

Use OrcaSlicer: it has a ready-made profile for the Kentstrapper Mavis.

Ready-made profile for the Kentstrapper Mavis

No profile for the Kentstrapper Mavis

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Kentstrapper Mavis.

Cloud-Based Slicer for Kentstrapper Mavis: Use OrcaSlicer Online

Use OrcaSlicer and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Kentstrapper Mavis models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Kentstrapper Mavis: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the Kentstrapper Mavis

SimplyPrint works as the Kentstrapper Mavis's app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the Kentstrapper Mavis to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the Kentstrapper Mavis

There's no plate swapper or auto-ejection kit for the Kentstrapper Mavis in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

Kentstrapper Mavis specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research.

Size

Build volume 400 x 400 x 700 mm
Bed type Square
Bed size 400 x 400 mm
Max print height 700 mm

Printing

Max extruder temperature 280 °C
Has heated bed Yes
Max bed temperature 120 °C
Number of nozzles 1
Direct drive Yes
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Connecting

Supports serial printing No
Shipped firmware Klipper

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)
Slicer profile name(s) Kentstrapper MAVIS

The printer

Printer manufacturer / brand Kentstrapper
Printer model name Mavis
Made by a company from Italy

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Kentstrapper Mavis print?

Filament compatibility for the Kentstrapper Mavis: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles Great The direct-drive extruder feeds flexible filament well. Print slowly for clean results.
ABS & ASA With care The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA) With care Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC) With care On the edge - PC really wants an enclosed, hot chamber to avoid warping.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the Kentstrapper Mavis

Filaments the Kentstrapper Mavis prints well, Kentstrapper's own first, then the best known.

Find filament for the Kentstrapper Mavis All 3D printer filaments

Compare the Kentstrapper Mavis with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the Kentstrapper Mavis with other printers All Kentstrapper printers

Frequently asked questions

Is the Kentstrapper Mavis compatible with SimplyPrint?

Yes. The Kentstrapper Mavis ships with SimplyPrint built in, so you can slice, queue, start and monitor prints from your browser or the mobile app.

How do I connect the Kentstrapper Mavis to SimplyPrint?

Follow our step-by-step setup guide for the Kentstrapper Mavis. It shows how to connect it via Built in by the manufacturer, what you need for each, and which to pick.

What slicer should I use for the Kentstrapper Mavis?

We recommend OrcaSlicer for the Kentstrapper Mavis. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Kentstrapper Mavis kept up to date automatically.

Can I use OrcaSlicer with the Kentstrapper Mavis?

Yes. OrcaSlicer comes with a profile for the Kentstrapper Mavis, and you can run it in SimplyPrint's online slicer, so there's nothing to install.

What filament can the Kentstrapper Mavis print?

Based on its specs (hotend up to 280C, heated bed up to 120C), the Kentstrapper Mavis handles PLA, PETG, or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.

What is the Kentstrapper Mavis's bed size and build volume?

The Kentstrapper Mavis has a 400 x 400 mm print bed and prints up to 700 mm tall, a build volume of about 400 x 400 x 700 mm. See the full specifications table above for bed type, temperatures and more.

Can the Kentstrapper Mavis eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.